PANASONIC PT-F300U Lamp | ET-LAF100 / ET-LAP770 EAN 5057978269606
Lamp for PANASONIC PT-F300U 5057978269606 ET-LAF100 / ET-LAP770
- Additional information
PANASONIC PT-F300U Projector Lamp | ET-LAF100 / ET-LAP770
Projector Lamp for PANASONIC PT-F300U EAN 5057978269606
Avoid touching the naked bulb with bare hands as body oil left on the lamp may cause it to overheat. This may provoke an explosion.
We stock high quality, high brightness, long life genuine and grade A compatible projector lamps for PANASONIC PT-F300U.
How to remove spent lamp from your PANASONIC PT-F300U projector :
Onky disconnect the power cable after using the on/off button to power down the projector.
Allow the machine to cool down for a few minutes before removing the lamp. 5 – 10 minutes should be sufficient
Remove the lamp cover by unscrewing the screw that restrains it. Usually one or two screws.
Loosen the screws that fasten the lamp to the chassis. Usually 2 or three screws.
Pull out the lamp using the handle or by inserting your finger in the grove on the lamp chassis.
Insert the new lamp in the open lamp bay and fasten the restraining screws.
Place the lamp bay cover and fasten the screw as well.
Reconnect the power cable
Using either the remote control or the power button on the front panel, switch on the projector.
Do not create vibrations or move the lamp when it is warm – it’s very fragile.
On projectors with hi/eco mode use the eco mode by default
Projector Repair Service – https://projectorrepair.co.uk
We offer Next day delivery in The UK and Ireland as standard – Timed deliveries available, please call for details