VC-202-2000-001 Spontania User Training |

VC-202-2000-001 Spontania User Training

0 out of 5

SKU: VC-202-2000-001 Category: ClearOne - video conferencing

Description
Additional information

Description

Spontania User Training

4 hour online Spontania course for a group of upto 15 people. Covers everything you need to know to use Spontania effectively.

Clearone Spontania User Course (4-Hour Online Course For A Group Of Up To 15 People)

VC-202-2000-001

Additional information

SKU	VC-202-2000-001

Location: England
Manufacturer: Epson
Model: EH-TW650
Issue: Hello!

The projector will not turn on and the blue light doesn't either - this leads me to think it is an issue with the power supply? Not sure though. Thank you!

Alicia
Date: 2021-01-16 16:30:33 +00:00
Location: England
Manufacturer: Optoma
Model: UHD550X
Issue: I believe the DMD chip is faulty as I have about 4 dead pixels and it is getting worse.

I have been quoted an unreasonable amount from Optoma directly so thought I would look around.

I would need to compare your quote before any works are done.

Thank you.
Date: 2021-01-15 18:17:09 +00:00
Location: England
Manufacturer: InFocus
Model: X7
Issue: Hello,

Having just installed a replacement lamp in my projector, I plugged it into the mains to see a big flash and flying sparks. My electricity also tripped and required resetting at the fuse box. The lamp actually looks fine so something else has blown (the flash came from a different area to the lamp housing - somewhere directly behind the lens). I don't know where to start or if it's cheaper for me to buy a new projector instead of looking into repair.

Best regards,

Simon
Date: 2021-01-15 16:59:25 +00:00
Location: England
Manufacturer: Hitachi
Model: Ed-A101
Issue: You are scheduled to pick up our projector on Monday 18th Jan. We are unable to remove it from the wall mounting as we cannot locate the ‘key’ to do this. Do you have such a key?
Please advise
Regards
J Woods
Date: 2021-01-15 16:02:29 +00:00
Location: England
Manufacturer: Hitachi
Model: ED-A101
Issue: We have an appointment on Monday 18th Jan for you to come and collect our wall mounted projector but unfortunately we are unable to remove it because we can’t find the ‘key’ to unscrew it. Do you have a key?
Thank you
J Woods
Date: 2021-01-15 15:14:22 +00:00
Location: England
Manufacturer: ViewSonic
Model: VS14937
Issue: Please advise procedure and costs for repair
Date: 2021-01-15 13:21:23 +00:00
Location: England
Manufacturer: Other
Model: Xiaomi Mijia Laser projector TV 4K
Issue: Hello!

I was wondering if it was possible to have a quote on fixing our projector and how it works, currently it can take a few minutes to start up and the picture tends to glitch once in a while. After some research it appears that there could be a manufacturing error, please see the breakdown in the link below
https://www.projectorjunkies.com/xiaomi-4k-laser-ust-projector-repair/

Thanks in advance for your time and look forward to hearing back!
Thanks,
Hollie
Date: 2021-01-14 22:16:51 +00:00
Location: England
Manufacturer: SIM2
Model: D80
Issue: Hi, projector has come up with fan failure. Have investigated and it is the lower lamp fan that seems to have failed. Specs are 80x80x15 3 pin 12v 1.3w sunon maglev KDE 1208PHV3. Would like a quote for repair. Many thanks.
Date: 2021-01-13 23:55:16 +00:00
Location: England
Manufacturer: ViewSonic
Model: Pro8600
Issue: Hi,

From what I understand the projector needs a new bulb.

Regards,

Rhys
Date: 2021-01-13 13:55:08 +00:00
Location: England
Manufacturer: Other
Model: DBPOWER
Issue: DBPOWER LED-86 1280x768 High Definition Digital Projector with 2800 Lumens LED Bulb, 2 HDMI, USB, YPBPR, S-Video, VGA Interface for Games Console, Blu-ray, DVD Player (White)

https://www.amazon.co.uk/dp/B00CZ514TO/ref=pe_385721_51767431_TE_dp_1

This is the link to the projector that I have. The projector has power as the standby light is on but it wont actually turn on. I think it is something really simple but I cannot work out what it is.

What are the costs for the repair?

If it is unrepairable can I trade it in for parts?

Thanks,

Mohan
Date: 2021-01-12 20:54:10 +00:00
Location: England
Manufacturer: BenQ
Model: W1070
Issue: Hi, projector colours are bleeding, then after 45 mins or so colour disappears and then projector shuts down. I’m told it could be the colour wheel sensor that needs cleaning?
Date: 2021-01-12 16:22:54 +00:00
Location: England
Manufacturer: Hitachi
Model: ED-A101
Issue: The shutter does not shut, it just clicks.
It won’t project a clear picture.
Date: 2021-01-12 10:47:59 +00:00
Location: England
Manufacturer: InFocus
Model: 3138HDA
Issue: Hello,

I am hoping to have our InFocus 3138hda projector repaired, we have had it around 5 years and it has done us well (with a couple of lamp replacements), however more recently the lamp blew, once we had dismounted it from the ceiling you could hear there was broken glass, after opening the unit up it was clear that it was from within the lamp. We thought we would be able to just replace the lamp (which we have a spare of) however it seems that a small internal glass piece is cracked within the projector which obviously needs replacing, it would be easier if i could send a photo of this before the repair is started so you can let me know if it is repairable or not. Once I have heard back from you i will send over the photos. Thanks in advance
Date: 2021-01-11 20:44:27 +00:00
Location: England
Manufacturer: ViewSonic
Model: M+
Issue: Projector not turning on.
Power is still on as light shows when plugged in to charger.
Date: 2021-01-11 10:00:28 +00:00
Location: England
Manufacturer: Sony
Model: vpl cs2
Issue: power on off button permanantly on
Date: 2021-01-10 14:39:53 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW5300
Issue: Get's very hot and the fan makes a flicker / click sound during operation. Could really do with a service
Date: 2021-01-10 07:58:28 +00:00
Location: Wales
Manufacturer: BenQ
Model: BenQ W11000
Issue: Hi there,

I have a BenQ W11000 in need of repair. I think the hdcp 2.2 is malfunctioning and the buttons are not correctly responding, i think theres some flicker between scenes (might be settings im not sure) . Also the load screen only half appears. I was just wondering how much it would cost to repair / service this to fully working condition?
Date: 2021-01-09 17:46:53 +00:00
Location: England
Manufacturer: Epson
Model: Eh-tw5210
Issue: Hi there,
I’m having an issue with my projector and I’m looking for a repair estimate.
I was running my projector when the image went off and the fan went high before turning the whole unit off. It had only been on for a couple of minutes, and it started displaying flashing lights. When consulting the manual, it coincided with this message:

Lamp has a problem
Check to see if the lamp is burned out, broken, or installed incorrectly; reseat or replace the lamp as necessary
Clean or replace the air filter
If operating the projector at high altitude, turn on High Altitude Mode
If the problem persists, unplug the projector and contact Epson for help

It is about four years old with about four thousand hrs usage.
Any help would be great appreciated.
Kind regards
Date: 2021-01-09 08:24:09 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW490
Issue: It’s working fine it’s just making a very loud noise
Date: 2021-01-08 08:15:47 +00:00
Location: England
Manufacturer: Epson
Model: Epson EB-S31 Portable Projector (SVGA, 3LCD,
Issue: Very little amount of liquid entered it on Jan 7th. Image splits the yellow colour.
Date: 2021-01-07 18:42:47 +00:00
Location: England
Manufacturer: ViewSonic
Model: Pro7827HD
Issue: The 'RLC-101' (OSRAM P-VIP 240 0.8 E20.9N type) lamp has popped, emitting broken glass. I can provide a replacement lamp.The item does not respond to its power button or send a video signal to its RS-232 port. Are you able to give an estimate for lamp replacement and rebooting, please?
Date: 2021-01-05 18:37:12 +00:00
Location: England
Manufacturer: BenQ
Model: 1070
Issue: My projector had a fixed white dot for a few weeks. Now more have appeared. I'm up to about 8.
So it needs internal cleaning or whatever is required to get rid of these
Date: 2021-01-04 21:51:47 +00:00
Location: England
Manufacturer: Epson
Model: TW-650
Issue: Suddenly stopped working with no signs of life whatsoever. Tired a new fuse and different kettle lead. No luck. Looking for an estimate to fix. I also have a spare bulb if that need replacing then I can provide. Looking for a rough quote only right now. Thank you
Date: 2021-01-04 13:30:34 +00:00
Location: Scotland
Manufacturer: Optoma
Model: EX774N
Issue: Hi. After a period of inactivity the projector failed to project any image. Fitted a new bulb and a good image seems to be projected but the projector is making alarming noises. Looking at repair?
Thank you
David Sullivan
Date: 2021-01-04 12:03:40 +00:00
Location: Scotland
Manufacturer: Optoma
Model: Hd141x
Issue: Projector has stopped working post dust cleaning. Fan was very loud pre gentle clean. Red led lamp as well as standby lights are on. Fan/unit no longer starts up. Unit is 4 years old. Perhaps also neds new bulb. Can be picked up anytime. Thanks
Date: 2021-01-03 16:59:52 +00:00
Location: England
Manufacturer: SIM2
Model: domino
Issue: one fan was not working. I replaced the 3 wire fan by new. still the error message "fan failure" appears on the screen. it will either work for the entire movie with the message on and off .
OR occasionally switch off after 1 minutes after starting up
Date: 2021-01-03 16:11:55 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW650
Issue: Project is only about 18 months old and has only had five maybe six films watched through it
However my stepson had been gaming on it for over 5 hours a day constantly for weeks despite me telling him it would break.
The projector is completely dead, no power , no lights absolutely nothing. I've bought a new power cable and also tried another socket but nothing
Can you help
Regards
G Rieffel
Date: 2021-01-01 17:04:44 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW3200
Issue: Hi, would you be able to repair my projector for me?

It's an EH-TW3200, 9 years old so out of warranty. It's overheating - the red temperature lamp comes on and the projector switches off. It's got to the point where it's happening immediately I switch it on. I've tried replacing the air filter, but it didn't help.
Date: 2020-12-31 17:05:13 +00:00
Location: England
Manufacturer: Optoma
Model: OPTOMA EH416 PROJECTOR
Issue: Hello I have a flickering light
Date: 2020-12-30 23:08:40 +00:00
Location: England
Manufacturer: Optoma
Model: OPTOMA EH416 PROJECTOR
Issue: I have a flickering light problem
Date: 2020-12-30 23:04:57 +00:00
Location: England
Manufacturer: Optoma
Model: Unsure
Issue: Hi, just noticed a single white dot on my screen, I've been advised it can repaired, something to do with the DMD chip? Please let me know if this is possible, also the price. Cheers.
Date: 2020-12-30 17:23:43 +00:00
Location: Scotland
Manufacturer: Optoma
Model: DS330DLP
Issue: Error message "fan locked"
Date: 2020-12-29 17:02:02 +00:00
Location: England
Manufacturer: Panasonic
Model: W21 lens
Issue: We have some Panasonic W21 wide fixed lenses that need cleaning. Both have condensation inside the middle of the lens, most likely from smoke machines as they were installed in a nightclub.

The projectors are fine, its just the lenses that need cleaning which are separate / loose units to the projector. Is lens cleaning a service you offer? If so, can you please quote for 2x lenses.

Date: 2020-12-29 08:54:54 +00:00
Location: England
Manufacturer: Other
Model: Bomaker Parrot I
Issue: Please let me know the cost before going ahead.

My son has dropped the projector onto the floor face down so the lens has jammed.

Plus I found google chrome wasn’t working as per usual.

Date: 2020-12-28 13:34:01 +00:00
Location: England
Manufacturer: Mitsubishi
Model: HC6500
Issue: Quote please for internal clean
Date: 2020-12-27 18:23:40 +00:00
Location: England
Manufacturer: Acer
Model: Acer H7550BD Full HD DLP Home Cinema 3D Proj
Issue: Hi there my Acer H7550BD Full HD DLP Home Cinema 3D Projector unfortunately had a dribble of water through the top of it and now I can’t get it to power on. Frustrating part is it’s only 6 months old.
Date: 2020-12-27 01:01:18 +00:00
Location: England
Manufacturer: Optoma
Model: S334e
Issue: Hi,

I hope you’re well.

My optoma S334e fell off a shelf, the plastic shell has come off but still works. It was turning on as normal but started coming up with a message saying contact support, I also noticed the temperature button was coming on and some of the internal sections are getting hot. It had since stopped turning on and the bulb light is coming on.

Can this be fixed and how much would it cost?

Best,

Joe
Date: 2020-12-26 17:16:37 +00:00
Location: Germany
Manufacturer: Philips
Model: HDP2510
Issue: i need a color wheel for my projector
(Philips HDP2510)
Date: 2020-12-26 15:20:04 +00:00
Location: England
Manufacturer: Other
Model: ANKER - Mars II
Issue:
I'm looking for repairing service for the projector: Anker Mars II.
The device I have won't turn on. It shows full power and I guess fully charged, but nothing is happening when I move down the shutter.
Is it something that you can help me with?
Date: 2020-12-25 20:35:44 +00:00
Location: England
Manufacturer: Other
Model: Pico Projector Set Smarttech
Issue: It dropped on the head, it’s working but it’s bumped on the side and won’t go back in, it needs to be aligned
Date: 2020-12-24 02:33:21 +00:00
Location: England
Manufacturer: Other
Model: BAUER T510 Stereo
Issue: Dear Sir,

Do you repair Super 8 Projectors?

Date: 2020-12-23 12:24:10 +00:00
Location: England
Manufacturer: Panasonic Home Projector
Model: Panasonic LCD PT-AE7000AE
Issue: Have a green vertical line just off centre on screen.
Replaced bulb and cleaned filters
Date: 2020-12-21 18:34:59 +00:00
Location: England
Manufacturer: Other
Model: Kodak
Issue: Hi I have an old projector that I have just managed to get fixed however tonight I have tripped over it and it eont work again. I urgently need it fixed fie chrustmas as it's a present for an elderly relative. Can you let me know asap if this is something you could fix
Date: 2020-12-20 21:10:04 +00:00
Location: England
Manufacturer: BenQ
Model: W1070
Issue: Hi there
The power cuts out after around 30 mins - the fan doesn’t seem to be working so I think there must Bea connection ?
Be great to know if you can help and the time frame please
Date: 2020-12-20 18:22:28 +00:00
Location: England
Manufacturer: Sharp PG Series
Model: xg-e650ub
Issue: Old Projector that was working fine, just turned off mid projection and won't turn back on
Date: 2020-12-20 09:58:23 +00:00
Location: England
Manufacturer: BenQ
Model: P- VIP 240W/0.8 E20.9n
Issue: The projector no longer turns on when plugged in to AC. We suspect water damage.
Date: 2020-12-17 17:29:13 +00:00
Location: Scotland
Manufacturer: Philips
Model: HDP1590TV/UK
Issue: after a period of non-use, we turned the projector on last night and it blew (there was a sound) as well as tripping our house fuse. we tested the cable which seems to work but the projector does not. we would like it fixed if possible as it is in good condition and the repair could be a simple job.
Date: 2020-12-16 11:13:37 +00:00
Location: England
Manufacturer: Sanyo
Model: PLC XM150L
Issue: ALL WARNING LIGHTS ARE FLASHING WHEN LAMP TRIES TO STRIKE
Date: 2020-12-16 10:14:38 +00:00
Location: England
Manufacturer: Other
Model: Anker Nebula Mars II
Issue: Hello,
It seems to be a power issue as the projector is not turning on.
Many thanks
Date: 2020-12-13 17:38:12 +00:00
Location: Scotland
Manufacturer: Optoma
Model: EP727i
Issue: We have white dots on the screen when projecting and they are increasing. I was wondering how much it will cost to fix it. Thanks
Date: 2020-12-13 17:23:19 +00:00
Location: England
Manufacturer: BenQ
Model: Benq Tw523p
Issue: how much does a general cleaning cost?

Date: 2020-12-13 09:41:18 +00:00
Location: England
Manufacturer: BenQ
Model: W1200
Issue: Having had a bulb burst in the machine and having replaced it twice subsequently it would appear there is now a fault, perhaps a safety measure which is making the bulb malfunction. Symptoms are that after about two minutes the picture starts to flicker and then sometimes cuts out
Date: 2020-12-11 17:17:05 +00:00
Location: England
Manufacturer: Hitachi
Model: CP-S335
Issue: This projector has served our church very well for around 15 years. Although we have cleaned the filter, used air duster on the lenses, and replaced the bulb last month, we still have a green circular hue in the centre of the projected image. This has worsened over the last few years. Is it likely to be a degraded image device in the optical path or something that can be cleaned with a major strip down please?
Is it going to be economic to repair, as its filter is completely shot and I have seen them available for £86.28, which seems very expensive? Not worth replacing unless we can get rid of the green hue. It’s fitted to the ceiling in the hall of our rented premises so we would probably not be able to get it down until next weekend.
Date: 2020-12-11 16:53:04 +00:00
Location: England
Manufacturer: Philips
Model: PPX3410
Issue: WHEN ONE POWERS UP THE PROJECTOR, AFTER THE PHILIPS LOGO COMES UP IT SHOULD SHOW THE MENU PAGE. INSTEAD A BLACK & WHITE CHECKED PATTERN COMES UP AND THEN A FLICKERING BLUE SCREEN. NO MENU PAGE COMES UP.
Date: 2020-12-11 11:31:33 +00:00
Location: England
Manufacturer: BenQ
Model: not sure. recall code 167-113-410
Issue: Hi. I am looking for an urgent repair here so my machine is working for the weekend. Failing that if you have a loan option whilst being repaired that will work. Please call me to discuss options. Cheers Ben
Date: 2020-12-10 19:35:08 +00:00
Location: England
Manufacturer: Acer
Model: H6502BD
Issue: Hi, the projector will work some days and not others. Sometimes it will make the usual start up fan noise but no light, then it beeps and the lamp light flashes red, it then turns itself off.
The bulb still works.
Date: 2020-12-10 16:47:56 +00:00
Location: Belgium
Manufacturer: Philips
Model: HDP2510 FULL HD
Issue: Hello,

My HDP2510 FULL HD the projector no longer displays anything. The fan turns, the start button light up, but no projection
Date: 2020-12-10 15:54:15 +00:00
Location: England
Manufacturer: Acer
Model: H6521BD
Issue: Hi,
I tried cleaning the inside of my projector. However I am now unable to put the plastic cover back on top of the projector. It does not need repair, I only need help putting back the top cover with the screws as I am worried I will break it. Do you know how much that would cost?
Date: 2020-12-10 10:40:40 +00:00
Location: England
Manufacturer: Epson
Model: EB470
Issue: Projector Keeps shutting down after random periods 10 mins to 2 hours . New lamp has been tried but made no difference
Date: 2020-12-09 15:29:21 +00:00
Location: England
Manufacturer: InFocus
Model: in124st
Issue: Please quote me to replace the DLP chip on the projector,
Date: 2020-12-09 14:50:15 +00:00
Location: England
Manufacturer: Optoma
Model: Gt1080
Issue: Says lamp error but bought and fitted new lamp still doesn’t work,
Date: 2020-12-08 22:32:02 +00:00
Location: England
Manufacturer: InFocus
Model: in2128hda
Issue: The 2nd projector is also infocus in3118hd.
Could you recycle if not cheap to repair
Date: 2020-12-08 14:58:23 +00:00
Location: Scotland
Manufacturer: Mitsubishi
Model: HC5500
Issue: There is something wrong with both HDMI input channels. It was caused by connecting an output from an HDMI video/audio splitter unit. That unit also disabled two Apple iPad HDMI connectors. I suspect some sort of excess voltage overload on the input signal circuits. All other sspects if the projector are fine.
Date: 2020-12-08 14:06:44 +00:00
Location: England
Manufacturer: Optoma
Model: HD50
Issue: The small glass filter between the lamp and the colour wheel had a burned on brown spot (dust I guess). I tried to clean it and cracked the filter glass. Small filter glass needs replacing. Thanks
Date: 2020-12-07 19:19:46 +00:00
Location: England
Manufacturer: Philips
Model: Screeneo 1550
Issue: Hi, Philipps France gave me your contact to fix my screeneo.
How could I send it to you?
Sincerelly.
Date: 2020-12-06 10:27:48 +00:00
Location: England
Manufacturer: LG Electronics
Model: PF1000U
Issue: Hello,

The projection light on my LG PF1000U no longer comes on when the projector is turned on. Is this something you could repair and if so, how much is it likely to cost?

Thanks,
Jeremy.
Date: 2020-12-05 21:45:31 +00:00
Location: England
Manufacturer: Philips
Model: screeneo hdp1590 projector
Issue: Hi there

I’m experiencing whites spot along the top of the screen and few in middle.
Date: 2020-12-02 18:35:25 +00:00
Location: England
Manufacturer: BenQ
Model: Tw523p
Issue: I think the colour wheel motor has gone. Bulb only has around 1000hrs used and the fans are clear. Constant red lamp light is on
Date: 2020-12-02 09:10:35 +00:00
Location: England
Manufacturer: Epson
Model: H262B
Issue: Picture has gone very green
Date: 2020-12-02 08:29:22 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW650
Issue: My projector has no life. There is no power light or anything it’s totally dead. I’ve tried the cable ( bought a new one) but nothing. It’s not the household socket
Date: 2020-12-01 17:36:58 +00:00
Location: England
Manufacturer: BenQ
Model: W2000
Issue: The lamp of my projector blew up, projector needs lamp replacing and cleaning + check. Need to know estimate for repair
Date: 2020-12-01 16:03:28 +00:00
Location: England
Manufacturer: Sony
Model: vpl-hw65
Issue: projector power on but hdmi port not working no display any thing thanks call me text me or email me please
Date: 2020-11-30 19:12:13 +00:00
Location: England
Manufacturer: Sony
Model: vpl hw65
Issue: HDMI port not working for both
let me know via email or by text message or phone me thanks
Date: 2020-11-30 17:55:25 +00:00
Location: England
Manufacturer: Sony
Model: vpl-hw65
Issue: hi its all working only problem with hdmi port not working both ones
Date: 2020-11-30 17:51:31 +00:00
Location: Scotland
Manufacturer: Epson
Model: Epson eh-tw650
Issue: Can you give me approximate price for repair boot problem on my projector. Its not a lamp because I bought new lamp replace old one and projector didn't show any screen,lamp doesn't give any light but fan is working. Thank you for response.
Date: 2020-11-30 14:39:10 +00:00
Location: England
Manufacturer: HP
Model: Ep7112
Issue: The temperature light is flashing which is stopping the lamp from staying on. I purchased and fitted a new lamp which had not resolved the issue.
Date: 2020-11-30 14:14:13 +00:00
Location: England
Manufacturer: BenQ
Model: TK800
Issue: My projector started showing vertical white lines
Date: 2020-11-30 12:02:36 +00:00
Location: England
Manufacturer: Optoma
Model: HD26
Issue: Hi my projector picture started flickering, i changed the lamp but the picture is still flickering

Is this something you might be able to fix?
Date: 2020-11-30 09:32:57 +00:00
Location: England
Manufacturer: Optoma
Model: HD600X-LV
Issue: The projector fails to start.
Date: 2020-11-29 12:28:24 +00:00
Location: England
Manufacturer: Epson
Model: EB-X9
Issue: I couldt connect my lap to projector and the lamp lights are on too , its really urgent please connect with me
Date: 2020-11-29 09:53:30 +00:00
Location: England
Manufacturer: LG Electronics
Model: PH450UG UST
Issue: Hi,

The power is working fine but it is not showing anything yet.
Date: 2020-11-27 23:36:55 +00:00
Location: England
Manufacturer: Optoma
Model: FULL HD 3D
Issue: THE FAN ISNT WORKING ON THIS PROJECTOR
Date: 2020-11-27 16:35:57 +00:00
Location: England
Manufacturer: Optoma
Model: HD20 DLP
Issue: Hi
Looks like a color wheel gone ,because it works only in black and white from yesterday
Date: 2020-11-26 09:52:44 +00:00
Location: England
Manufacturer: NEC
Model: L51W
Issue: Hi
My NEC PL51W Projector that I use as a Home Cinema has stopped working. Not sure what the problem is: My guess is that it is Fan related as it seems to shut down when the lamp comes one.

Note: I live fairly close to the Shop so i could bring it in for you to take a look at.
Date: 2020-11-25 13:51:22 +00:00
Location: England
Manufacturer: BenQ
Model: LW61ST
Issue: Hi, image started having vertical dark lines after 5 min of running. Some of those lines become white after a while.
Date: 2020-11-24 18:34:57 +00:00
Location: England
Manufacturer: BenQ
Model: W1070
Issue: Hello

I was wondering if I could get a quote for how much it will cost to repair my projector. The power isn't working on it - in addition how long will the guarantee be and how much will it cost?

Regards

Fabienne
Date: 2020-11-24 17:21:31 +00:00
Location: England
Manufacturer: Sanyo
Model: PLC-Z%
Issue: The project keeps shutting down while we are using. It will start again but may shut down after a few minutes, or be OK for a few hours. Please can you help?
Date: 2020-11-24 15:56:08 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW6100
Issue: HDMI ports faulty
Date: 2020-11-23 09:14:44 +00:00
Location: England
Manufacturer: JVC
Model: D-ILA X7
Issue: My JVC X7 is exhibiting a fault which looks like the ballast board has gone. Standby and Warning LEDS on Red constantly, and the amber led continually blinking. How much to repair this?
Date: 2020-11-22 22:46:34 +00:00
Location: England
Manufacturer: Epson
Model: eh-tw8100
Issue: Hi there. Projector was working fine, maybe the fan was a little loud Im not sure...it could have happened gradually over time. The picture was also fine, apart from dark coloured areas of the image would look pixilated.
It just stopped working yesterday - when I turn it on it would make the noises it usually makes to power up and then after a few seconds the lamp light and the temperature light would both flash red repeatedly.
I have had the projector 7 years. I dont use it a huge amount and I have not changed the bulb in that period, so I am guessing it might be just the bulb that needs changing.
The timing is unfortunate as I really could do with having it up and running by the end of this week as Im moving out on Saturday 29th in the am.
Please give me a call, many thanks, David.
Date: 2020-11-22 17:22:19 +00:00
Location: England
Manufacturer: Philips
Model: PicoPix PPX3610
Issue: Picopix projector does not switch on. Possible battery or electrical problem.
Date: 2020-11-22 17:06:19 +00:00
Location: England
Manufacturer: Philips
Model: PicoPix PPX3610
Issue: PicoPix projector does not switch on. Possibly battery or electrical problem.
Date: 2020-11-22 17:02:43 +00:00
Location: England
Manufacturer: Epson
Model: tw6100
Issue: Hi, my epson will not dispaly menu option.. just a blue screen
Date: 2020-11-22 10:51:19 +00:00
Location: England
Manufacturer: Epson
Model: EHTW5650
Issue: Hi, no image displayed on the projector (dark). We tried with 3 different HDMI cables so looks like it is the projector itself.
Date: 2020-11-22 09:31:41 +00:00
Location: England
Manufacturer: Hitachi
Model: PJ-TX10
Issue: Hi, just require a rough estimate of cost for repair to the above projector. It is in working order but a yellow/orange tint has developed down the middle third of the screen (Happy to attach an image). Many thanks
Date: 2020-11-21 11:47:50 +00:00
Location: England
Manufacturer: Digital Projection
Model: Epsom EH-TW6100
Issue: HDMI inputs faulty
How much to repair
Not urgent
Date: 2020-11-21 10:46:22 +00:00
Location: England
Manufacturer: ViewSonic
Model: PJD6381
Issue: Hello
I tried to change the lamp and I made a small mess out of it (including a cable that I accidentally disconnected). I got the replacement lamp; all I want is someone to replace it properly, reconnect the broken cable, and put everything back together.
It is a straightforward job, so I'd appreciate an estimate of cost before agreeing anything. (I will also consider doing it urgently, depending on the cost).
PLEASE CALL ME BEFORE COLLECTION.
Date: 2020-11-19 19:59:22 +00:00
Location: England
Manufacturer: NEC
Model: NEC M420x
Issue: Projector has a fault with it’s iris (dynamic contrast error)
Date: 2020-11-19 15:06:29 +00:00
Location: England
Manufacturer: Acer
Model: H7550BD
Issue: The colour is flickering - must be the colour wheel that gone.
Date: 2020-11-19 10:35:28 +00:00
Location: Wales
Manufacturer: Other
Model: Wimius
Issue: First I would like to ask for an offer about the repairing price. And I would like to take to your place the projector if it is possible for the quick check. Please contact me by email and we can agree on the details. Thank you in advance.
Date: 2020-11-19 01:21:04 +00:00
Location: England
Manufacturer: BenQ
Model: W1070
Issue: Hi.
My hubby changed coloured wheel himself put all back together and projector not switching on.
We gave for repair which took 2 months and nothing was done.
Guy stated that he found that ballast panel not firing a lamp.
I took it away to try you guys if you able to help us.
If repair will be very expensive than it won't worth fixing in my opinion.
Let me know what you think.
I am assuming I am giving you only projector without cable,remote control etc?

Date: 2020-11-18 17:13:25 +00:00
Location: England
Manufacturer: Philips
Model: PicoPix PPX3414
Issue: Projector just showing red on screen think colour wheel might be to blame
Date: 2020-11-18 16:05:37 +00:00
Location: England
Manufacturer: Optoma
Model: gt1080e short throw projector
Issue: The projector does not turn on, I have taken it to another shop who says the lamp and everything is working fine but was not able to make it turn on, says it might be the motherboard.
Date: 2020-11-16 17:21:36 +00:00
Location: England
Manufacturer: BenQ
Model: w1400
Issue: Projector not turning on.
Date: 2020-11-16 10:38:24 +00:00
Location: England
Manufacturer: Epson
Model: Tw9200
Issue: Hi, have a thin stripe running down the right of the screen (vertically) I’m sure your well aware of this type of fault.
Apart from this it’s working fine.
Can you give me a guide to how much a repair would cost please,

Date: 2020-11-15 10:23:13 +00:00
Location: England
Manufacturer: NEC
Model: M23OX
Issue: Just a simple bulb replacement
Date: 2020-11-14 22:28:42 +00:00
Location: England
Manufacturer: NEC
Model: M230X
Issue: Just a simple replacement.
Date: 2020-11-14 22:26:22 +00:00
Location: Scotland
Manufacturer: NEC
Model: VT45
Issue: The screen appears to have an old image burned into it it appears very blue in area that should be black.
Date: 2020-11-13 19:11:58 +00:00
Location: Ireland Including Northern Ireland
Manufacturer: Sanyo
Model: PLC - XU88
Issue: I have a Sanyo projector , model number PLC - XU88 and the image is yellow.
I have replaced the lamp but this had no effect, can you advise on a possible solution or point me in the right direction pls.
Date: 2020-11-13 15:19:38 +00:00
Location: England
Manufacturer: Optoma
Model: DAEHUGUST
Issue: I have recently changed the lamp in my projector as the the old one had burnt out and it was impossible to power on before. Now the projector does enter a start up and the fan appears to be going but then enters the same mode after 3 attempts at booting up. I believe it is an issue with the power supply but I cant be sure. Absolutly no image whatsoever is projected.
Date: 2020-11-13 13:53:20 +00:00
Location: England
Manufacturer: Mitsubishi
Model: Hd4000
Issue: Serial No 6005682
New bulb installed but fires up for a minute then switches off again.
Date: 2020-11-13 10:16:13 +00:00
Location: England
Manufacturer: LG Electronics
Model: Hecto laser projector
Issue: Good afternoon,
I am currently trying to source just the colour wheel for the above mentioned projector.
Our repairer here in Australia is telling me that we have to get the whole optical unit at a costly price, would it be possible that you may have a colour wheel and what would the price be please.
Thank you
Paul.
Date: 2020-11-13 09:50:37 +00:00
Location: England
Manufacturer: Epson
Model: Eh-tw6000
Issue: Hi on my screen is a yellow vertical line straight through the displayed picture is it fixable ? How much that will cost to repair ?
Date: 2020-11-12 20:09:35 +00:00
Location: England
Manufacturer: Philips
Model: HDP1590/10
Issue: Hi,

I have been in touch with the Phillips customer device, advising me to contact you for a lamp replacement.
Please could you tell me if you have it in stock. If so please let me know how much it costs for a shipment in France.

Thank you.
Regards
Date: 2020-11-12 08:53:49 +00:00
Location: Wales
Manufacturer: SIM2
Model: C3X T2
Issue: Colour convergence issue.

Date: 2020-11-11 15:11:09 +00:00
Location: England
Manufacturer: Philips
Model: PicoPix
Issue: Screen picture all red in colour
Date: 2020-11-11 10:08:25 +00:00
Location: England
Manufacturer: NOBO
Model: S25
Issue: Hi I was given the above machine second hand so not sure how many hours use it has had. The only issue I know it that it has white dots on the projected picture so am looking for an estimate for cost to get this resolved.

Thank you
Date: 2020-11-10 20:34:13 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW3200
Issue: Hello,
The projector displays a "No Signal" message for both HDMI1 and HDMI2 ports. I have tried different cables, computers and OSs (Mac, Windows and Linux) to no avail.
Thanks.
Date: 2020-11-09 20:25:03 +00:00
Location: England
Manufacturer: Acer
Model: h6502bd
Issue: machine powers on but does not recognise the new bulb I fitted it flashes for a while then comes up with a red led saying lamp the bulb is original replacement at a cost of £120
kind regards
Date: 2020-11-09 13:42:47 +00:00
Location: England
Manufacturer: InFocus
Model: X10
Issue: Projector works fine for about 30 mins and then goes into standby
Date: 2020-11-09 11:17:22 +00:00
Location: England
Manufacturer: BenQ
Model: Short throw
Issue: Power issues. Stopped working mid use and now won’t power on.
Date: 2020-11-09 06:22:41 +00:00
Location: England
Manufacturer: BenQ
Model: Short throw
Issue: Power issues stopped working in use and now won’t power on.
Date: 2020-11-09 06:19:23 +00:00
Location: England
Manufacturer: BenQ
Model: W1810ST
Issue: I took the projector apart because of a common issue with the color wheel, serviced it and have put it back together but now just get a flashing green light, i'm not an expert so i'd assume i've put something back incorrectly and need some help!
Date: 2020-11-06 11:53:52 +00:00
Location: England
Manufacturer: Philips
Model: Screeneo 2.0
Issue: Hi,

My Philips Screeneo 2.0 projector (2 years old) has stopped working - turning it on causes the power led to flash green and fans to start, but the lamp doesn't turn on and nothing else happens. The problem started after the projector seemed to develop a fault on startup, emitting a whining sound and showing a very blurry image - seemed like the focus motor was working hard - i pulled the power in a panic and after that it hasn't worked. This has happened on starting the projector a couple of times in the past but restarting it has always fixed the issue

Wondering if you could either help me troubleshoot the problem or else would be able to repair the projector?
Date: 2020-11-04 20:52:17 +00:00
Location: Scotland
Manufacturer: Optoma
Model: GT750
Issue: Black and white dots appeared on the screen.
Date: 2020-11-04 13:03:57 +00:00
Location: England
Manufacturer: NEC
Model: M230X
Issue: The projector is broken and needs recycling please.
Date: 2020-11-03 22:51:22 +00:00
Location: England
Manufacturer: Epson
Model: ebx31
Issue: Projector not recognising HDMI - checked leads, think there is an issue with the port.
Date: 2020-11-03 20:37:13 +00:00
Location: England
Manufacturer: Optoma
Model: HD151X
Issue: You kindly repaired my projector and replaced the lamp last year. The lamp blew again a few months later which I think is a risk with projectors. I would like to try replacing it one final time before giving up and buying a tv. Thanks!
Date: 2020-11-03 18:17:48 +00:00
Location: England
Manufacturer: Hitachi
Model: cpa222wn
Issue: lamp replacement and slight case repair if possible
Date: 2020-11-03 11:40:10 +00:00
Location: England
Manufacturer: Christie
Model: DWX951
Issue: Projector is showing an error ode of 'Other'. I believe that it may be a colour wheel issue. Please can you take a look and send me a quote when possible. Any collection Mon-Fri between 8am-5pm, although the sooner the better ideally.
Date: 2020-11-03 07:41:01 +00:00
Location: England
Manufacturer: BenQ
Model: mp-622c
Issue: I don't know what's happening but now I can't see anything just a lot off black points
Date: 2020-11-02 21:00:44 +00:00
Location: England
Manufacturer: Acer
Model: H7550BD 1080p DLP 3D
Issue: When I start the projector, the blue power light starts blinking but there is a noise that sounds like the projector tries to power up but is unable to do so.

After about ten seconds the light next to the text “lamp” which is printed on the projector starts blinking in red colour. The sound of attempting to start the machine stops and the projector does not turn on.

I have had the projector since May 2017 and never had any issues and no impact on the projector such as drops or falls.

I suspect the lamp needs replacing. Please could you let me know if you are able to do this and how much it would cost?

Kind regards
Date: 2020-11-02 15:05:09 +00:00
Location: England
Manufacturer: Acer
Model: H7550BD 1080p DLP 3D
Issue: When I start the projector, the blue power light starts blinking but there is a noise that sounds like the projector tries to power up but is unable to do so.

After about ten seconds the light next to the text “lamp” which is printed on the projector starts blinking in red colour. The sound of attempting to start the machine stops and the projector does not turn on.

I have had the projector since May 2017 and never had any issues and no impact on the projector such as drops or falls.

I suspect the lamp is broken and needs replacing. Please could you let me know if you are able to do this and how much it would cost?

Kind regards
Date: 2020-11-02 15:02:40 +00:00
Location: England
Manufacturer: Acer
Model: PD113
Issue: Hi

Can you repair an Acer PD113 DLP

It keeps switching off after about 30 seconds

Thought it was the build which I’ve replaced but still the same

Maybe overheating, the light comes on and then the projector shuts down

Tried to have look inside If there was a filter the clear but can’t see anything

Please advise and any plans over lock down

Date: 2020-11-01 13:52:04 +00:00
Location: England
Manufacturer: Optoma
Model: HD39 darbee
Issue: I presume it is the colour wheel with my DLP projector as it is the main spinning part. We experienced a few times some grinding noise from inside the projector after a few hours.

Can I have a quote please?
Date: 2020-11-01 09:37:57 +00:00
Location: England
Manufacturer: Casio
Model: Xj m150
Issue: Hi, I have a casio xj m150 projector that will not power on. It started last week, I plugged it in and no stand by light came on. I left it plugged in and switched on and about an hour later the light came on. The same happened again and now this time it is plugged in but nothing is happening at all
Date: 2020-10-30 21:14:43 +00:00
Location: England
Manufacturer: Other
Model: Boots Auto Zoom deluxe
Issue: Hello
I am looking to pass on this 1960s projector, would you have any ideas on who might want it?
Thanks
Dawn
Date: 2020-10-30 08:53:56 +00:00
Location: England
Manufacturer: SIM2
Model: color wheels for SIM2 RTX45 & Yamaha DPX1300
Issue: Hi,
I need color wheels for both the SIM2 RTX45 & Yamaha DPX1300.
Can you source these?
Thanks
Tom
Date: 2020-10-28 11:15:15 +00:00
Location: England
Manufacturer: BenQ
Model: MP515ST
Issue: It has white dots showing on the projected screen.
DMD chip needs replacing?
Date: 2020-10-27 19:12:43 +00:00
Location: England
Manufacturer: Acer
Model: x1160PZ
Issue: The projected image from my projector has a large amount of black dots on it and a few white ones.
Date: 2020-10-27 17:30:01 +00:00
Location: Ireland Including Northern Ireland
Manufacturer: Epson
Model: EB 5200
Issue: 2 red lights
Date: 2020-10-27 11:02:12 +00:00
Location: England
Manufacturer: Optoma
Model: HD39 DABREE
Issue: Good Morning,
I damaged my projector lens through trying to clean it while it was still hot. Do you think that will you be able to fix it for me? Thank you, Jaroslav
Date: 2020-10-27 05:46:33 +00:00
Location: England
Manufacturer: InFocus
Model: Infocus Screenplay 777
Issue: Hello,

The projector is working for a short while and then stops projecting.
Date: 2020-10-26 14:01:22 +00:00
Location: England
Manufacturer: BenQ
Model: W1070
Issue: Woudn't switch on. Steady red signal is on power
Date: 2020-10-25 09:25:19 +00:00
Location: Scotland
Manufacturer: Optoma
Model: OPTOMA HD142X
Issue: There was a bang and the smell of burning. I believed the lamp had exploded.
I bought received a new bulb yesterday and fitted it.
There were fine bits of glass within the projector but the 'faulty' bulb seemed intact.
However, although the projector switches on and the blue light flashes the projector does not project.
Date: 2020-10-24 12:16:02 +01:00
Location: England
Manufacturer: LG Electronics
Model: PH300-GL
Issue: Display not possible lamp is not working
Date: 2020-10-24 06:27:30 +01:00
Location: England
Manufacturer: InFocus
Model: IN80
Issue: Hi
The projector is not receiving a signal from the AV but is producing light and showing its brand and messages on start up.

Date: 2020-10-23 15:59:36 +01:00
Location: Scotland
Manufacturer: Optoma
Model: DH401
Issue: The projector was purchesed in 2017 and is out of warranty. The blue light flashes when powered up and wont go beyond that point. No fan noise and no light. Bulb has had very little use.
Date: 2020-10-23 15:56:32 +01:00
Location: England
Manufacturer: Optoma
Model: HD143X
Issue: Hi there,

We just purchased this projector and were told it needed a bulb replacement. It turns out the previous one had exploded and there is glass everywhere inside. We tried to replace the bulb and remove as much glass as possible. The bulb worked, but now we have an error that says the fan is locked, and it turns of after the error message.
Date: 2020-10-22 20:09:47 +01:00
Location: England
Manufacturer: Sony
Model: VPL-HW55ES
Issue: Hi ,

The back light is flashing x3 when Turned on after checking the troubleshooting guide it says the lamp needs replacing. I’ve bought this part however need it fitting.
Date: 2020-10-22 17:30:43 +01:00
Location: England
Manufacturer: InFocus
Model: IN80
Issue: The projector will start up, project its brand and messages, but won't get past trying to receive a signal
Date: 2020-10-21 17:45:39 +01:00
Location: England
Manufacturer: BenQ
Model: W1070+
Issue: Temperature warning light is displayed and projector shuts down after a few minutes of operation
Date: 2020-10-20 11:20:19 +01:00
Location: England
Manufacturer: Epson
Model: Epso EB-U05
Issue: Was on stand by mode led on .
A local electrical repair company failed to repair
the said requires a board
Needs psu repair
Date: 2020-10-18 11:01:27 +01:00
Location: England
Manufacturer: Epson
Model: EB-U05
Issue: Power button lights up but status or other lights do not. Abdrea called me to say price will be £289.00 if this includes collection and deliver please can we go ahead with collection and repair ? Please email me to confirm. NB we open office hours 9-5

Date: 2020-10-16 11:44:43 +01:00
Location: Ireland Including Northern Ireland
Manufacturer: Optoma
Model: EP 761
Issue: Projector has white dots across picture
Date: 2020-10-15 15:08:00 +01:00
Location: England
Manufacturer: Dell
Model: S300wi
Issue: I have white spots when projecting my films on to my wall, this is for personal use.
Date: 2020-10-13 12:11:20 +01:00
Location: England
Manufacturer: InFocus
Model: IN83
Issue: Morning,

My Infocus IN83 suddenly stopped dead without power while watching a movie.

I have serviced it regularly and this is not dust in the duct leading to overheating. It simply stopped without any of the indicators lights still on (as I would have expected if it had overheated).

The lamp was replaced a few months ago.

I am a qualified electrician (from another life) and have looked for the obvious signs of aging on capacitors etc. There is nothing that I can see at the moment so would need another look.

The projector is currently opened and can as such send photos etc if it helps.

If you could contact me for an initial discussion at your convenience please?

(note I have filled in the collection data as the form wont send otherwise but it is not valid as such)
Date: 2020-10-13 08:26:55 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW6100
Issue: Hi, my projector has half a dozen blue and red vertical bands that have appeared on the screen. Can these be repaired and at what cost please? Can be collected on any date as currently working from home.
Date: 2020-10-12 18:25:17 +01:00
Location: Scotland
Manufacturer: JVC
Model: Dla-x55rwe
Issue: Think pj overheating as after 30 mins, symmetrical vertical magenta lines appear across image. If left to cool lines disappear for another 30 mins until pj heats up.
Running high, hot lamp mode made fault appear faster. Low lamp mode + high fan slows this down. Using external pc fan to direct additional cool air over the filter intake allowed pj to operate indefinitely in any mode until I l replaced the bulb. New OEM bulb runs much hotter. Now lines appear across image permanently. Then, think fan nearest front right vent has failed as warning light blinks repeatedly twice & pj won't start. Please advise of costs of collection, inspection & return before I commit to send pj away.
Date: 2020-10-12 15:41:48 +01:00
Location: Scotland
Manufacturer: Acer
Model: H7550BD
Issue: The projector is operational, but comes up with a fan fail warning and shuts down shortly after, 1 of the 4 fans can be seen visually working and runs continuously, the main fan that draws from the lamp briefly comes on and then stops, but the 2 fans that blow air into the projector body do not come on.
Date: 2020-10-12 12:55:58 +01:00
Location: England
Manufacturer: Optoma
Model: HD26
Issue: Hi, I have an Optoma HD26 with a worn colour wheel. Are you able to advise a price to fix this for me please?

Many thanks
Date: 2020-10-11 13:35:24 +01:00
Location: England
Manufacturer: Acer
Model: D1P1426
Issue: Projector is flickering, require a replacement bulb. Thank you
Date: 2020-10-11 08:48:42 +01:00
Location: England
Manufacturer: Epson
Model: EBX20
Issue: Lamp light and temperature light come on immediately projector is switched on. I suspect a thermistor or fan fault.

If you have a dealer in Bury St. Edmunds I can drop the projector off and collect it when the repair has been done. Otherwise the exact collection date doesn't really matter but your web-site requires one to be added.
Date: 2020-10-10 21:25:55 +01:00
Location: England
Manufacturer: Mitsubishi
Model: VLT-XD600LP
Issue: It does not turn the lamp on. The lights of status and power flashing
Date: 2020-10-10 12:16:17 +01:00
Location: England
Manufacturer: Other
Model: Elephas 2018
Issue: I need a new part brown bler on left hand side
Date: 2020-10-09 19:10:46 +01:00
Location: England
Manufacturer: Epson
Model: EB-X39
Issue: Hello,

Our Projector is not working - how much does it cost to fix please? Thank you!
Date: 2020-10-08 12:25:37 +01:00
Location: England
Manufacturer: Acer
Model: unknown
Issue: How much to look a ACER projector repair we are based in North Wales
Date: 2020-10-07 14:09:27 +01:00
Location: England
Manufacturer: Epson
Model: EB-470
Issue: Projector Keeps shutting down with overheating lamp on. This is random and can be anything from 10 Mins to several hours. A replacement lamp has been tried but made no difference.
Date: 2020-10-07 13:30:28 +01:00
Location: England
Manufacturer: BenQ
Model: MS514H
Issue: Power Failure. The machine went "bang" when turned on and there was a light smell of burning.
Date: 2020-10-06 14:14:55 +01:00
Location: England
Manufacturer: BenQ
Model: MS514H
Issue: The unit has a power failure. It went "bang" and there was a slight burning smell when turned on.
Date: 2020-10-06 14:10:33 +01:00
Location: England
Manufacturer: Optoma
Model: EX7155e
Issue: Greetings,
I'd like to request a quote for the replacement of an Eptoma EX7155e DMD chip, labour and postage.
Thanks.
Date: 2020-10-04 15:40:26 +01:00
Location: England
Manufacturer: Epson
Model: Home Cinema 2040
Issue: The lamp of my projector blasted off few days back. It was overdue a lamp replacement but I still kep using it, hence the incident.
Date: 2020-10-04 11:13:44 +01:00
Location: England
Manufacturer: NEC
Model: L51W LED Projector
Issue: Hi

My Projector has stopped working.
When you turn on the Projector the lamp light flashes red and then it Turns off. But the Lamp light keeps flashing red.

Please can you provide me with a quote to repair it.

(Note: I live in Islington so I can drop it into the Shop and come and pick it up).

Many Thanks
Angus
Date: 2020-10-04 10:31:49 +01:00
Location: England
Manufacturer: Acer
Model: H7550BD
Issue: The fan stopped working so it overheats and shuts down. Was just wondering if it’s worth repairing and how much it would cost
Date: 2020-10-03 18:47:25 +01:00
Location: England
Manufacturer: Acer
Model: H7550BD
Issue: The fan stopped working so it overheats and shuts down. Was just wondering if it’s worth repairing and how much it would cost
Date: 2020-10-03 17:34:28 +01:00
Location: England
Manufacturer: Optoma
Model: EH341
Issue: Please contact me to discuss repair - lamp works but after 1:45 min the projector switches off and gives "lamp failure". I disconnect and reconnect and same happens.
Date: 2020-10-03 14:27:59 +01:00
Location: Scotland
Manufacturer: Sony
Model: VPL-EW235
Issue: Projector has a fan rotation error (4 flashes). No obvious blockages or problems with the fans themselves that I can tell. Can you guess what might be wrong and give me an estimate for repair? Thanks, Peter
Date: 2020-10-03 10:55:38 +01:00
Location: England
Manufacturer: Optoma
Model: Optoma Full HD 1080P
Issue: Need a repair on projector and service.
Machine bolted to beam and needs special Allen keys to get off?? Can you help?
Date: 2020-10-02 15:37:06 +01:00
Location: Wales
Manufacturer: Promethean
Model: PRM-35
Issue: We are having difficulties with 3 of our Promethean projectors, they turn on but after say 5-10 minutes, they start flashing then go off and you cannot turn them back on. We tried replacing the bulb as we thought that had gone, but it just made the screen dark and did the exact same thing.
Date: 2020-10-01 13:58:49 +01:00
Location: England
Manufacturer: Epson
Model: EB-U05
Issue: The power button is coming on when plugged in but no status or any other lights are appearing?
Date: 2020-09-30 15:33:26 +01:00
Location: England
Manufacturer: Vivitek
Model: D538W-3D
Issue: Hi my dmd chip needs replacing on a vivitek D538W-3D can you give me a quote please
Date: 2020-09-30 14:07:12 +01:00
Location: England
Manufacturer: Other
Model: ABOX GC357
Issue: Hi, our projector fell off its stand and now it will not turn on at all, we cannot find anywhere that does repairs for it in Newcastle. Can you help?
Date: 2020-09-29 15:32:02 +01:00
Location: England
Manufacturer: Epson
Model: epson eh tw 5400
Issue: cant turn on the projector
Date: 2020-09-29 09:29:24 +01:00
Location: England
Manufacturer: Epson
Model: epson eh-tw5400
Issue: the projector doesnt work at all, cant even turn on
Date: 2020-09-29 09:05:00 +01:00
Location: England
Manufacturer: Samsung
Model: SPA400BX/EDC
Issue: Hello... I have this Samsung projector that hasn’t worked for ages.. I’ve just checked and it doesn’t turn on.

Wanting for someone to tell me if it’s economical to repair and if so would be great to get it fixed!

I can drop it to you? I work in Chelsea 3 days a week..
Date: 2020-09-26 14:39:55 +01:00
Location: England
Manufacturer: Other
Model: Miroir MP50 Mini Projector
Issue: The projector works fine for 10 minutes and then cuts out. Are you able to give an approximate cost of repair
Date: 2020-09-25 16:18:59 +01:00
Location: England
Manufacturer: BenQ
Model: Lamp: 5J.JAH05.001
Issue: I require a lamp change.
Date: 2020-09-25 12:52:37 +01:00
Location: Scotland
Manufacturer: Mitsubishi
Model: XD250U
Issue: I have recently bought a lamp as when I was turning my projector on it told me that this was the problem I have inserted the new lamp however I still have white dots which suggests something to do with DMD Board?
Date: 2020-09-24 22:37:43 +01:00
Location: England
Manufacturer: Barco
Model: Projection design F22
Issue: Following a repair by yourselves, I am trying to contact holly@projectorrepair.co.uk but get "Delivery has failed to these recipients or groups:
holly@projectorrepair.co.uk (holly@projectorrepair.co.uk)
Your message couldn't be delivered." Can you help by providing al alternative email of phone number as we need your support.
Date: 2020-09-24 09:51:32 +01:00
Location: England
Manufacturer: Optoma
Model: Optoma HD20
Issue: Please advise return of Optoma HD20 (service and colourwheel), repeated requests to return, repair has now taken 3 months and has been fully paid for.
Date: 2020-09-23 10:57:55 +01:00
Location: England
Manufacturer: Epson
Model: EPSON EH-TW7100 3LCD 4K PRO-UHD 3000 LUMENS
Issue: Good morning,
the issue am having with this projector is
Lamp error condition. Lamp has been changed by fault persist

The best way to get in touch with me would be
Date: 2020-09-23 10:23:01 +01:00
Location: England
Manufacturer: Epson
Model: ELPLP78
Issue: Screen won't load, it's loading a circle rotating like it's trying to load but nothing happens, tried to reset everything on the settings, shut it down several.times, let it completely cool down and still it's doing the same thing.
Date: 2020-09-22 23:54:58 +01:00
Location: England
Manufacturer: Optoma
Model: H181X
Issue: Hi, This projector has completely stopped working and will not turn on...
If it not possible to repair cheaply, I would be happy to recycle it with you.
Date: 2020-09-22 16:25:07 +01:00
Location: England
Manufacturer: Optoma
Model: HD141X
Issue: Hi,

The projector colour wheel failed, I attempted a repair with a new wheel unsuccessfully.

Best Regards

Danny
Date: 2020-09-20 08:19:22 +01:00
Location: England
Manufacturer: Mitsubishi
Model: Mitshubishi HC 3800
Issue: This projector is not powering.It has a brand new Lamp.This projector need attention.Thank you.
Date: 2020-09-19 22:34:30 +01:00
Location: England
Manufacturer: LG Electronics
Model: PF1500G-GL/WHITE
Issue: Good Afternoon,
The main issue im having is that the Charge port is damaged.Is this something you would be able to sort out and fix?

Best way to get in contact with me is though email

Kind regards
Date: 2020-09-18 13:31:27 +01:00
Location: England
Manufacturer: JVC
Model: DLA-X3-WE
Issue: The projector says it needs new bulb , but replaced bulb and fault is still there.
Date: 2020-09-17 08:54:50 +01:00
Location: England
Manufacturer: Other
Model: ALICHN, H100
Issue: The projector doesn't work. Pick up to recycle.
Date: 2020-09-16 12:08:20 +01:00
Location: England
Manufacturer: InFocus
Model: SP1080
Issue: Hi - I'm getting a brown / yellow tinge on the screen. I'm told that the chip or colour wheel may have gone. Can you advise a cost please?
Date: 2020-09-16 10:43:39 +01:00
Location: England
Manufacturer: Philips
Model: Screeneo 2.0
Issue: It powers up but no image is projected. I have replaced the bulb and got an image for about a minute but once I switched it off and on again the problem was the same. I’ve tried contacting you before - if you can’t help could you email me to let me know. Thanks
Date: 2020-09-16 08:59:31 +01:00
Location: England
Manufacturer: Optoma
Model: Q72H815AAAAAC0553
Issue: Hi!
We’re looking to get a full service for our projector.
It’s makes a lot of noise - we purchased it 2 years ago and haven’t had it serviced yet.
Thanks, Pont
Date: 2020-09-15 15:12:10 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW6100
Issue: We have one of these projectors installed that has developed some vertical lines on the projected image.

Please can you give me an estimate of the cost to repair
Date: 2020-09-15 10:09:00 +01:00
Location: England
Manufacturer: Epson
Model: TW5650
Issue: It was working properly on Sunday 13/09 afternoon, but when I try to turn it on in the evening on the same day, it did not power up; and there is no fan noise or image at all.

When pressed the “Power Button”, only WLAN light is stable blue. Before that, when it was standby, the only difference is the light on the blue Power Button is on as well, but when pressed that Power Button, the light disappeared and only WLAN light is on.

And it stays like that, even I unplug it, leave it for more than 30 mins, then plug it back using a different power cord, to a different wall socket, it just remain the same – even cannot get back to the standby mode.

So I am wondering if I could have an estimate on the cost to repair then would decide the next step please?

Thanks a lot.
Date: 2020-09-15 10:08:35 +01:00
Location: England
Manufacturer: InFocus
Model: In80
Issue: Projector light works but when initiating it doesn't get past setting up message. DVD/AV signal not being received - so maybe HDMI input repair?
Date: 2020-09-15 09:17:14 +01:00
Location: Scotland
Manufacturer: Optoma
Model: HD141X DLP
Issue: The projector image has lost colour & makes a loud whirring noise. Most likely from the colour wheel.
Date: 2020-09-14 17:47:05 +01:00
Location: England
Manufacturer: Epson
Model: EB-485Wi
Issue: I would be interested in a quote please for the cleaning of our projector. The quality of picture isn't very good at all. We tried putting a new bulb in, but it hasn't really improved things.
Once we've had a quote, I would like to book it in within the next couple of weeks.
Date: 2020-09-14 15:53:51 +01:00
Location: Scotland
Manufacturer: ASK Proxima
Model: Other
Issue: I found few errors which correspond with a drop of website traffic over the past months. May i send you errors and the solutions that would help to improve your website performance?
Regards
Ava Wilson
avaseowebmaster@gmail.com

Date: 2020-09-14 13:09:33 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW650
Issue: Hi there,
During a storm our projector was damaged. It no longer switches on. Please could you let me know if you can collect to take a look.
Many thanks,
Nic
Date: 2020-09-12 23:22:29 +01:00
Location: England
Manufacturer: Optoma
Model: HD151X DLP Projector
Issue: Hi, I am having problem with the power socket. When I plug in the cable there is flickering noise and the projector does not power on. Only sometimes when the cable is in some positions. The issue seems to be with the male power socket in the projector. Thanks! Best wishes, Eduardo.
Date: 2020-09-12 16:29:19 +01:00
Location: England
Manufacturer: BenQ
Model: BenQ W1110 DLP Projector
Issue: I have replaced the lamp in this projector after the original exploded. The new lamp has worked for about 2 months but stopped working and the 'Lamp' light is showing red.
Date: 2020-09-12 11:56:39 +01:00
Location: England
Manufacturer: Philips
Model: Screeneo 2.0
Issue: Looking for a bulb replacement with casing for our Phillips Screeneo 2.0
Date: 2020-09-11 16:25:46 +01:00
Location: England
Manufacturer: Acer
Model: P1173
Issue: At this point, I would just like a quote if possible, a ballpark figure so I can decide whether to just replace it (we want to upgrade at some point) or get it repaired. I think it is an issue with the colour wheel as the image is very yellow
Date: 2020-09-11 16:16:33 +01:00
Location: England
Manufacturer: Other
Model: ZECO CX3
Issue: it's a mini projector, it powers on and flashes with the correct starting page image and turns off immediately. Probably just something wrong with the power regulation, can i post it to you to fix it? it should be pretty simple.
Date: 2020-09-10 18:32:34 +01:00
Location: England
Manufacturer: Other
Model: Photax dual 8 projector P - 111Q
Issue: Photax dual 8 projector P - 111Q

Are you able to repair a model of this age? If not, can you suggest a company that could?
Thank you
Date: 2020-09-09 10:00:42 +01:00
Location: England
Manufacturer: Optoma
Model: HD72i
Issue: I use the projector regularly but sporadically and its mainly for cinema nights with my child. It is quite old but not had a great deal of use and has always worked really well. Unfortunately, I was cleaning today and knocked the table over that the projector sits on and it hit the floor from about metre above the ground.
The casing was a bit loose in places but clicked back in no problem. I tested the projector and on first powering up there was no light or beam at all. After switching off and on again I got the normal óptima logo screen, I focused in ok then it cut out and there was no light again. I tried numerous times with the same result... Either no light/picture at all or else it gives the picture for a short time and then cuts out.
Date: 2020-09-08 16:42:35 +01:00
Location: England
Manufacturer: Optoma
Model: EX551 - DAEXUUG
Issue: I have this projector in a holiday home and the screen is flooded with white dots. I am deciding on whether to scrap it or save for a new one. There is no urgency as I will not be collecting the projector for a couple of months
Date: 2020-09-08 15:32:19 +01:00
Location: England
Manufacturer: NEC
Model: P451WG
Issue: We have an NEC projector which is displaying a pink tinge on one side of the screen. We’ve replaced the bulb with a new one (it was nearly due a replacement anyway) but there is still a tinge to the colour. It’s not affected by the leads in the projector, the cleanliness of the filter (which we’ve changed) so we’re a bit stumped as to what it might be!

Could you let us know an idea of if this might be repairable? And a rough idea of costs involved?

Many thanks!
Date: 2020-09-07 16:15:47 +01:00
Location: England
Manufacturer: HP
Model: mp3320
Issue: My projector is missing!
It was collected for repair on 16 January 2020. I have the receipt, with consignment number
EK648020592GB.
Since that date I have heard nothing from you.
Apologies for the long delay in following it up, but it's been quite a year.
Date: 2020-09-06 16:06:35 +01:00
Location: Scotland
Manufacturer: Optoma
Model: Dlp Hd400
Issue: projector lamp was replaced and work fine altho colours were not great. I have changed colour wheel and now it will no longer work
Date: 2020-09-04 14:18:54 +01:00
Location: England
Manufacturer: BenQ
Model: MS500
Issue: Hi, I dropped the projector and now it doesn’t switch on.
Date: 2020-09-03 22:32:51 +01:00
Location: England
Manufacturer: Other
Model: Excelvan
Issue: What would be a quote to have an excelvan projector repaired. It works fine other then when I connect my HMDI it projectors in brighton random colours.
Date: 2020-09-03 12:20:56 +01:00
Location: England
Manufacturer: Dell
Model: 4210x
Issue: I was looking for a price to repair our dell projector. We have white dots on the projected screen image we think the dmd chip may need replacing following the projector overheating.
Date: 2020-08-21 00:26:00 +01:00
Location: England
Manufacturer: Other
Model: Unknown
Issue: Hi,

I have a dark spot on my projector screen, I think it needs some replacement part/parts, but still turns on and is working fine.
If Monday is not suitable for collection, please suggest an alternative date. Pls note I am based in London, but the form does not have London listed in the drop down box.
Date: 2020-08-20 14:37:21 +01:00
Location: England
Manufacturer: Other
Model: xiaomi mijia 4k Ultra short throw projector
Issue: Can you fix this model? It seems that one of the lamps is out.
Date: 2020-08-19 20:18:46 +01:00
Location: England
Manufacturer: Optoma
Model: HD142X
Issue: The Colour Wheel is making a load noise on startup (It is not the fan)

Can you source and replace this part?
Date: 2020-08-19 20:13:18 +01:00
Location: England
Manufacturer: Optoma
Model: UHD550X
Issue: My projector has developed a single white dot in the middle of the screen.

Secondly the picture has a tendency to flicker on very bright areas

Please contact me before arranging any collection
Date: 2020-08-19 10:43:45 +01:00
Location: England
Manufacturer: Optoma
Model: B079R9VG2X
Issue: Good morning,

I'm having an issue with an optima projector that Fan locked error (fan spins) .Would I be able to get this looked at/ repaired with a quote on how much it would be .

The best way to get in touch would be though my email

Date: 2020-08-19 10:04:52 +01:00
Location: England
Manufacturer: Optoma
Model: HD82
Issue: The projector shut down whilst viewing, have changed the bulb but still will not power up from stand-by
Date: 2020-08-18 19:40:06 +01:00
Location: Scotland
Manufacturer: Acer
Model: X110P
Issue: The projected image is covered in little dots.
We are a youth development charity and use it for our projects with youths.
Date: 2020-08-18 14:59:39 +01:00
Location: England
Manufacturer: Optoma
Model: hd25
Issue: Can you contact me with an idea of price? I'm thinking it is the bulb.

Date: 2020-08-18 13:55:37 +01:00
Location: England
Manufacturer: Optoma
Model: ACH91300387
Issue: Good morning,

I was wondering if you would be able to give me a quote on how much it would be to fix the issue im having with this projector.

The issues with this projector is Lines down right side of video output when turned on.

The best way to get in touch would be though email: s.egan@oldham.servicecare.co.uk

Kind regards
sam Egan
Date: 2020-08-18 09:00:35 +01:00
Location: England
Manufacturer: BenQ
Model: WP
Issue: Hi there I’ve bought a new bulb and also a bulb in a lamp fitting but can’t get either to work - probably as I’m a bit cack-handed.
Date: 2020-08-18 08:45:46 +01:00
Location: England
Manufacturer: Philips
Model: Screeneo Smart LED Projector HDP1590TV/UK
Issue: Hello - Is it possible to repar this?
The lamp is working - It switches on but doesn't move beyond the startup screen. There is a timer circle showing ( a little like the buffering symbol) Suggesting a software problem. It isn't possible with the remote or the controls on the projector, to navigate away from this.
Thanks
Richard
Date: 2020-08-17 16:40:41 +01:00
Location: England
Manufacturer: Proxima
Model: DX3
Issue: A new lamps has been inserted, however the projector displays a strange screen, which is mostly white.
Date: 2020-08-17 14:54:09 +01:00
Location: England
Manufacturer: Sanyo
Model: Sanyo PLC-WM5500L HOME CINEMA HDMI PROJECTOR
Issue: We have a Sanyo PLC-WM5500L HOME CINEMA HDMI PROJECTOR 5500 LUMENS WXGA 16:10 which has a fault and will not now power up.
Could you please give us a rough budget cost for repair?

Date: 2020-08-17 08:50:50 +01:00
Location: England
Manufacturer: Optoma
Model: name: ES521 Model: DAESUNG
Issue: The projector has never shown any signs of coming on since someone pulled the power lead plug out of an extension cable/socket while the projector was on
Date: 2020-08-15 16:40:49 +01:00
Location: England
Manufacturer: Optoma
Model: HD600X
Issue: Will not switch on. I tried changing bulb but that made no difference and cleaned the fan. Still no good. Not bold enough to take to bits to clean it further
Date: 2020-08-15 16:06:43 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW4400
Issue: Projector intermittent fault . Will power up but after a random interval, maybe 10seconds or even 2 hours will switch off with all fans to maximum and the temp light flashing.
Date: 2020-08-14 22:31:30 +01:00
Location: England
Manufacturer: Smartboard
Model: 2012
Issue: We have a smartboard and the right hand fan is faulty. Could possibly need cleaning.
Date: 2020-08-13 12:06:47 +01:00
Location: England
Manufacturer: Optoma
Model: VDGTGZBZ
Issue: Good Afternoon,
The issue i'm having with this projector is no power there is no power going to the unit have tried different power cables but still no power.
Is It possible for a quote
Date: 2020-08-12 12:34:27 +01:00
Location: England
Manufacturer: Sony
Model: VPL-VW320
Issue: Both HDMI ports have been damaged and need replacing and re-soldering onto the PCB!
Date: 2020-08-12 11:29:41 +01:00
Location: England
Manufacturer: JVC
Model: D ILA 550 HD
Issue: Lamp light on.
Replaced lamp
Initially working ok but stopped working.
Initially able to restart by unplugging and re starting
Now won't come on.
Not able to reset lamp time.
Thanks
Date: 2020-08-11 17:04:16 +01:00
Location: England
Manufacturer: BenQ
Model: W1070+
Issue: Projector has power, fan spins up, lamp boots up, then it all immediately switches off. lense may also need cleaning
Date: 2020-08-11 11:56:03 +01:00
Location: England
Manufacturer: Optoma
Model: VDHDSL
Issue: white dots or lines depending on the contrast settings
Date: 2020-08-10 09:25:59 +01:00
Location: England
Manufacturer: Optoma
Model: VDHDSL
Issue: white dots or lines depending on the contrast settings
Date: 2020-08-07 09:31:31 +01:00
Location: England
Manufacturer: Optoma
Model: VDHDSL
Issue: white dots sometimes lines radiating outward from the bottom of the screen
Date: 2020-08-07 08:51:38 +01:00
Location: England
Manufacturer: Other
Model: CL760
Issue: Hi, I was just wondering how much it would cost to change the polariser filter film on the LCD?
Date: 2020-08-05 14:27:06 +01:00
Location: England
Manufacturer: Epson
Model: H620B
Issue: Hi,

At this stage I'd just like a rough estimate of the cost of repair.

The problem we have is horizontal blue lines moving vertically up the picture.

Thanks for your help,

Sam
Date: 2020-08-03 17:47:00 +01:00
Location: England
Manufacturer: BenQ
Model: W1080ST+
Issue: Hi, my projector is overheating after about 20 minutes of operation and turning off. The Temp warning light comes on.
Date: 2020-08-03 11:38:45 +01:00
Location: England
Manufacturer: Optoma
Model: HD83
Issue: I have an Optoma HD83 Projector and the warning light is flashing. I have changed the lamp for a compatible lamp but Light still flashes

Date: 2020-08-02 16:07:05 +01:00
Location: England
Manufacturer: Other
Model: Amazon
Issue: Unknown brand/model, approx 3 years old. Issue is there is a large dark spot on the screen. Have cleaned but cannot remove. Available for collection any weekday from tomorrow.
Date: 2020-07-30 14:05:09 +01:00
Location: England
Manufacturer: Optoma
Model: HD143x
Issue: Projector is omitting a buzzing sound which is constant and loud, It's especially loud when hdmi 2 is being used
Date: 2020-07-27 19:08:09 +01:00
Location: England
Manufacturer: BenQ
Model: W2000
Issue: Lamp unit
Date: 2020-07-21 16:51:48 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW 490
Issue: Last week my bulb went and was replaced.After turning the machine on and using it for some hours I witnessed a flash from the centre of the unit and experienced total power loss.I have been advised that the problem is not with the new bulb.
Please note that I prefer to be contacted by Email and that my address might not show up on Satnav because my flat was not built that long ago. Thankyou.
Date: 2020-07-21 15:09:40 +01:00
Location: England
Manufacturer: BenQ
Model: W1080ST
Issue: The projector is producing strange and flashing colours, but needs service anyway. There is a brand new bulb in it.
Date: 2020-07-20 21:11:01 +01:00
Location: England
Manufacturer: Other
Model: Hanimex Loadmatic 800
Issue: We have a very old projector that we are unable to get the bulb working even though we have a replacement bulb. Please can you assist with a repair.
Date: 2020-07-17 19:39:48 +01:00
Location: England
Manufacturer: NEC
Model: NEC V230X
Issue: My projector is showing increasing number of White dots on Screen, needs new DLP chip I think
Date: 2020-07-17 11:55:38 +01:00
Location: England
Manufacturer: Acer
Model: P1220
Issue: We have an Acer P1220 DLP Projector which has suddenly stopped working in colour when connected to a hdmi source. It works in colour using video-in and still works in colour when using a hdmi cable for sound via the dvd 5.1. But if I change the source to hdmi (say DVD or laptop), it becomes monochrome. I have tried different hdmi cables and different hdmi sources. I have tried to clean it of dust. Any clues as to why this switch of source causes the loss of colour? Thanks.
Date: 2020-07-16 16:52:49 +01:00
Location: England
Manufacturer: Sony
Model: vpl-hw65
Issue: the projector is not coming out of standby
Date: 2020-07-12 14:16:34 +01:00
Location: England
Manufacturer: Epson
Model: Epson H555B
Issue: Not quite sure what’s wrong with the projector, but know that one issue is the lamp. The next issue is that it starts remains on for less that 5mins makes a loud nose and then switches off. Would like a quote, because if projector repair cost more than the cost of an actual projector might as well buy a new one
Date: 2020-07-11 23:15:20 +01:00
Location: England
Manufacturer: Epson
Model: EH TW9100
Issue: Hi there. The projector has a problem starting up. When the power is switched on there's the usual click and the fan starts up a few seconds later - only to stop after one or two seconds. The lamp and temperature warning lights are both flashing red, indicating a malfunction.
Date: 2020-07-11 16:19:17 +01:00
Location: England
Manufacturer: Epson
Model: EHTW9200
Issue: GREEN LINE ON SCREEN, INTERMITTENT, CAN YOU ADVISE IF YOU CAN REPAIR ON SITE AND COST?
Date: 2020-07-10 15:34:15 +01:00
Location: England
Manufacturer: Other
Model: Vankyo Leisure 510 HD Projector
Issue: Blue red and greenish lines have appeared on the projector screen and flash on or off
Date: 2020-07-09 13:19:17 +01:00
Location: England
Manufacturer: Other
Model: Vankyo Leisure 510 HD Projector
Issue: Lines have appeared on my projector screen: blue, red and green-ish lines that come on and off.
Date: 2020-07-09 13:16:32 +01:00
Location: England
Manufacturer: Epson
Model: Epson EH-TW74000
Issue: PJ needs a clean to remove dust spots that are being projected onto screen. Can you give me a quotation?
Date: 2020-07-07 17:06:39 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW74000
Issue: PJ needs a clean to remove dust spots that are being projected onto screen. Can you give me a quotation?
Date: 2020-07-07 17:05:56 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW74000
Issue: PJ needs cleaning to remove dust spots
Date: 2020-07-07 16:56:24 +01:00
Location: England
Manufacturer: Other
Model: unknown
Issue: Hello,
Do you repair motors on electric projector screens? I have had it out of the ceiling and there is no model number or branding on it. It has been running off a third party controller which still appears to be working so I presume the screen itself is at fault.
Let me know. Many thanks. Toby
Date: 2020-07-06 15:52:05 +01:00
Location: England
Manufacturer: ViewSonic
Model: PJD6253
Issue: Projector stopped working. Fitted a new bulb, but just cycles round, shutting down before lamp comes on. Red light on lamp button. Please can you give an estimate of repair cost before I go ahead with the booking. Thanks
Date: 2020-07-04 19:54:21 +01:00
Location: England
Manufacturer: Acer
Model: H6510BD
Issue: Dear sir/madam
i live in Israel.
1. can i send my projector for repair directly to your address ?
2. can you send the projector after your repair to the above address in London?
3. can you give me an estimation for motherboard replacement /repair for the above model?
4. do you accept pay pal payment?
is there any thing else i need to know?

regards
simon sabag
Date: 2020-07-02 16:25:30 +01:00
Location: Scotland
Manufacturer: Epson
Model: EH-TW650
Issue: Hi.
I have power issue in my Epson. I've changed lamp for new one and still my projector is not starting. When I pressing start button lamp not turning on and fan starting run really fast
Date: 2020-06-30 20:03:16 +01:00
Location: England
Manufacturer: Panasonic
Model: PT AE1000E
Issue: Lamps cuts out after a few seconds _ filters was cleaned worked for a film but cut out again next time
Date: 2020-06-30 13:44:47 +01:00
Location: Scotland
Manufacturer: Optoma
Model: HD142X
Issue: I emailed with a very detailed description of events but the shorter version is basically that the lamp burst, was replaced with another genuine lamp with same rating but only worked for 2 days before deteriorating (very slow to turn on, noise that sounds like coil whine) and now has lamp warning light again but am convinced the lamp itself is fine but did get so hot that the sticker burned off it. Suspect possible electrical component failure (something on ballast or PSU maybe?) potentially sending too much / insufficiently regulated power to bulb but lamp supply MOSFETs seemed to test fine. If urgency necessitates higher cost then would rather wait but have no TV. Please do not replace lamp unless 100% necessary as has only just been replaced by brand new one and another is en route.
Date: 2020-06-29 05:01:58 +01:00
Location: England
Manufacturer: Optoma
Model: HD151X
Issue: Hi.
I've recently purchased a second hand Optoma HD151X and was wondering how much it would cost to fix a problem with it.
It seems to have dust and debris inside the light path. This is visible when the projector is turned on with no signal and putting the focus wheel at one extreme brings the debris into sharp focus. With an input via HDMI the marks are still apparent, but less so. When the image is focussed, the debris marks become more indistinct, but they are definitely still there. On a pitch black screen, the debris marks become white dots.
Occasionally the machine emits a high pitched noise. This is not too loud, but may be indicative of another issue.
How much would it cost to give the optics a clean and check for any other problems?
Many thanks!
Date: 2020-06-28 02:54:29 +01:00
Location: England
Manufacturer: Sanyo
Model: plc-wm4500l
Issue: Please I'd like to replace the bulb for my two projectors (Sanyo plc-wm4500l). Also, I believe the projectors are in need of a service
Date: 2020-06-26 15:14:20 +01:00
Location: England
Manufacturer: Other
Model: NA
Issue: Digital Marketing Solution & Website Re-designing

We are a progressive web solutions company. We create stunning websites & put them on 1st page of Google to drive relevant traffic at very affordable price. Let us know if you would be interested in getting detailed proposal. We can also schedule a call & will be pleased to explain about our services in detail. We look forward to hearing from you soon. Thanks!

Date: 2020-06-26 10:11:40 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW6100W
Issue: The projector has blue strips through the picture!
Also the wireless HD is intermittent!
Thank you
Date: 2020-06-26 08:53:40 +01:00
Location: England
Manufacturer: Smartboard
Model: uf55
Issue: We need a new DMD chip, we have pixels which are dead
quote needed please
Date: 2020-06-25 08:41:00 +01:00
Location: England
Manufacturer: Epson
Model: Eh-tw6100
Issue: This is not a pickup request. I need info first. Please advise me of your charges. Fixed price? Do you require payment up front or will you advise me of repair cost after you check the item and I can then refuse ( pay postage to return)? What are carrier costs
Date: 2020-06-23 14:37:20 +01:00
Location: England
Manufacturer: BenQ
Model: W1080ST
Issue: Projector starts up and shortly after states it’s too hot and then shuts down. Red light

I think one of the fans requires replacing?

Regards
Date: 2020-06-23 12:40:33 +01:00
Location: England
Manufacturer: Optoma
Model: OPTOMA LH160 1500 LUMENS PORTABLE LED PROJEC
Issue: We have several projectors that need assessing, the Optoma mentioned above is the most urgent unit we need looking at. Please advise us if you can assess and repair it. The other makes and models I will send to you after you make contact.
Date: 2020-06-22 15:36:40 +01:00
Location: England
Manufacturer: Epson
Model: epson lcd emp tw680
Issue: The projector works fine but sometimes there's a message sating "Error in auto iris" and stop working. Could you please confirm if you think it is fixable and how much -approximately- would cost? I could deliver the projector to a London location if that makes it cheaper.
Date: 2020-06-17 11:07:16 +01:00
Location: England
Manufacturer: Epson
Model: epson lcd emp tw680
Issue: The projector works fine but sometimes pop up a message saying: "Error in Auto Iris" and stop working. Could you please confirm if you think you could fix it and an estimate how much would it cost? Thank you
Date: 2020-06-17 11:04:27 +01:00
Location: England
Manufacturer: AAXA Technologies
Model: Prinz Magnon serial no. 44696
Issue: We are looking to purchase a new drive belt.
Date: 2020-06-15 14:45:32 +01:00
Location: England
Manufacturer: SIM2
Model: SIM2
Issue: REPAIR REQUIRED ON A SIM2 PROJECTOR BULB HAS BEEN CHANGED BUT FAN IS NOT WORKING
Date: 2020-06-15 11:25:26 +01:00
Location: England
Manufacturer: Philips
Model: Phillips Screeneo 2.0
Issue: The projector broke over a year ago. I think it’s the bulb that’s gone - when it broke there was a burning smell and total loss of picture. This is not urgent - so happy to wait. Could you give me an estimate of cost?
Date: 2020-06-14 15:19:18 +01:00
Location: England
Manufacturer: Optoma
Model: HD143X
Issue: Hi,
I have an Optoma 143x projector and it popped up a warning of "fan locked contact service repair" it switched off automatically. I had an issue a few days ago like this but I'd left the room so I didn't get the message and it switched off. I swapped out the bulb thinking it was that and obviously it's a fan issue. Is this something you can repair?
Date: 2020-06-14 12:33:28 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW6100
Issue: Our projector has a greyish blue shadow area on the entire right side of the projected image. I wonder if this can be fixed.
Date: 2020-06-12 15:01:57 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW6100
Issue: Hi. Three vertical yellow lines and one blue vertical line appears on the screen. It started off with one yellow line and the other lines have recently appeared. Please could you diagnose the problem and let me know what the cost of the repair would be. Thank you.
Date: 2020-06-12 11:07:34 +01:00
Location: England
Manufacturer: Epson
Model: epsons TW-5350
Issue: can i please have a price breakdown of all the costs of repair and maintenance of this particular model?
Date: 2020-06-10 15:33:20 +01:00
Location: England
Manufacturer: Optoma
Model: HD600X
Issue: HI

There are multiple white dots on the projected image. I have also noticed a faint horizontal black line. Could you please give me a repair quote?
Date: 2020-06-07 12:26:48 +01:00
Location: England
Manufacturer: Acer
Model: P5271
Issue: The projectors are showing white dots as the DMD chips are failing

Please can you provide an estimate of the repair costs BEFORE I confirm collection Please quite for URGENT and non URGENT Thanks
Date: 2020-06-04 22:08:28 +01:00
Location: England
Manufacturer: Optoma
Model: HD144X
Issue: Projector has been displaying "Warning - Lamp Warning - Lamp Life Exceeded" on start up for a few months. Sometimes when booting up the screen would flicker until the colours stabilised. Now it turns on and they do not such that it continues to flicker. The colour wheel was also replaced 13 months ago. The unit is about 2.5 years old and purchased in the US.
Date: 2020-06-04 20:55:53 +01:00
Location: England
Manufacturer: Optoma
Model: HD144X
Issue: Projector has been showing "Warning Lamp Warning Lamp life exceeded" for a few months. Sometimes on start up it would flicker until the colours stabilised to the correct ones. Now it boots up and does not stabilise. I assume it needs to have a new lamp put in. About 13 months ago the colour wheel was replaced. The unit is about 3.5 years old and was purchased in the US. Please include in the reply and estimate for total repair cost and estimated duration.
Date: 2020-06-04 20:52:38 +01:00
Location: England
Manufacturer: BenQ
Model: W1080ST+
Issue: Hi,

Whilst changing the bulb on my projector some dust particles seem to have gotten on the inner lens. This has resulted in a cloudy picture being produced. I think I need to have it thoroughly cleaned throughout. Is this a service you provide? If so what are you lead times and costs?
Date: 2020-06-02 17:45:15 +01:00
Location: Scotland
Manufacturer: InFocus
Model: X10
Issue: Hi - our inFocus X10 overheats after about half an hour. Fans are loud which makes me think they might be worn. Would you be able to give us a cost estimate for fan replacement? Thanks.
Date: 2020-06-02 13:46:56 +01:00
Location: England
Manufacturer: InFocus
Model: IN128HDx
Issue: Cooling fan didn't always work and sometimes had to be flicked to get it started. a friend said he'd fix it by cleaning, but didn't work at all after he returned it, so probably the fan. If so can you give me an idea of cost to repair.
Date: 2020-06-02 13:28:44 +01:00
Location: England
Manufacturer: Mitsubishi
Model: Xd500u
Issue: Hi there,
This projector has some white dots on the top left hand corner of the screen.
Date: 2020-06-02 01:47:13 +01:00
Location: England
Manufacturer: Optoma
Model: HD25E
Issue: Hi. I have an Optoma HD25e and there is no picture, the bulb is on but produces a very feint screen display. Before this went there was a 'clean filter' message but no way to remove the filter so i just hovered the vents?!
Date: 2020-05-31 21:15:28 +01:00
Location: England
Manufacturer: Casio
Model: XJ-A135
Issue: I there, the project is showing a lot of black dots along with a couple of white ones. Is this something you can fix?
Date: 2020-05-30 11:12:58 +01:00
Location: England
Manufacturer: Sony, SIM2
Model: VLP-HW65
Issue: Hi there.

I think projecter requires a new fan
Date: 2020-05-28 21:17:46 +01:00
Location: England
Manufacturer: Other
Model: Xgimi H1
Issue: Dear Projector Repair team,

I am writing because my Xgimi H1 projector stopped working. It seems to be the power issue as it doesn’t turn on anymore (not even the power led indicator).

Do you repair Xgimi projectors?
Kind regards,
Arkadiusz
Date: 2020-05-26 15:37:17 +01:00
Location: England
Manufacturer: Epson
Model: TW9000W
Issue: My projector turns on and displays a picture but the left hand side has blue blocks randomly over the screen. Most likely a problem with the lcd/polarizer area of the machine. Can I get a rough guide for fixing an issue like this.

https://imgur.com/a/qCwfc8Y
Date: 2020-05-26 12:01:55 +01:00
Location: Wales
Manufacturer: Epson
Model: Cant remember
Issue: Im curious what the hell is happening with my projector your received it what must be close to a year ago and ive been fobbed off and forgotten about?
Date: 2020-05-21 13:38:24 +01:00
Location: England
Manufacturer: Optoma
Model: HD141X
Issue: Hello,

I have an optoma hd141x that won’t turn on after lamp and colour wheel replacement. It still has the lamp and power led’s illuminated red. Is it possible to get a rough quote for repair cost please?

Thank you
Date: 2020-05-18 16:08:00 +01:00
Location: England
Manufacturer: Optoma
Model: Dlp Hd400
Issue: No collection only require to purchase colour wheel
Date: 2020-05-18 16:03:05 +01:00
Location: England
Manufacturer: Other
Model: Mini smart projector
Issue: Hi,

There’s a problem with the projection image as there is a fuzzy line that appears across the middle of the screen.

Thanks
Tameka
Date: 2020-05-18 12:24:17 +01:00
Location: England
Manufacturer: Other
Model: 2
Issue: Inbound Marketing services for Online Business promotion
Date: 2020-05-18 06:36:18 +01:00
Location: England
Manufacturer: Other
Model: Hanimex La Rondette 800
Issue: Hi; I found this old projector in my parents loft just before lock down, with their slide collection dating back to the 1950's. It turns on and seems to work but is very dusty and could do with checkingout properly and a new bulb; its been left in the loft for probably 30 years. I'd love to get it properly up and running so I can look at their slides with them once we can all meet again and before my mum slips further into dementia.Do you think you can help? Or point me in the right direction. Many thanks, Helen
Date: 2020-05-17 20:57:09 +01:00
Location: England
Manufacturer: Canon
Model: LV-X310ST
Issue: There are dots all over the image. Could you please give a repair quote.
Date: 2020-05-15 14:50:23 +01:00
Location: England
Manufacturer: Optoma
Model: UHD40
Issue: The front elements on the lens have seen damaged. How much is it to replace the lens?
Date: 2020-05-13 07:12:03 +01:00
Location: England
Manufacturer: Optoma
Model: Hd141x
Issue: The projector shows dust bits in the projected image. Nothing too serious. Just a clean up from dust inside. What’s the fee?
Date: 2020-05-13 00:14:38 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW6100W
Issue: Projector is overheating quite quickly. Wondered if you could take a look as to why this is happening. Bulb needs replacing and a general cleaning please.
Date: 2020-05-12 19:47:05 +01:00
Location: England
Manufacturer: Mitsubishi
Model: HC7000
Issue: Dear Sir,

I hope you are well.

I have a Mitsubishi HC7000 LCD projector that has some dust blobs. It wasn’t too bad but there is no one pretty large one that spoils the picture.
If it’s possible for you to work on this projector could you please let me know the approx cost of:-

1. Removing dust from the LCD panels- eliminating the dust blobs (just this job only)

and:-
2. Doing a full service on the projector removing the dust blobs but also including other things like making the iris quieter, and fan a bit quieter too, if possible, and any other appropriate servicing.

I saw a video of how to dismantle this projector but it just looks far too complicated for me to try.

Thanks,
Colin
Date: 2020-05-11 06:03:01 +01:00
Location: England
Manufacturer: Mitsubishi
Model: HC7000
Issue: Dear Sir,

I hope you are well.

I have a Mitsubishi HC7000 LCD projector that has some dust blobs. It wasn’t too bad but there is no one pretty large one that spoils the picture.
If it’s possible for you to work on this projector could you please let me know the approx cost of:-

1. Removing dust from the LCD panels- eliminating the dust blobs (just this job only)

and:-
2. Doing a full service on the projector removing the dust blobs but also including other things like making the iris quieter, and fan a bit quieter too, if possible, and any other appropriate servicing.

I saw a video of how to dismantle this projector but it just looks far too complicated for me to try. I’d likely break i!

Kind Regards
Colin Byrom
Date: 2020-05-11 06:00:25 +01:00
Location: England
Manufacturer: Philips
Model: Screeneo HDP1590
Issue: Been in the loft a while, powered on today and all was working fine. Tried this evening, as I switched on it made a slight noise and now no power and will not switch on. Checked fuse, that's ok. Maybe main board has gone?
Date: 2020-05-10 21:29:05 +01:00
Location: England
Manufacturer: Other
Model: Yamaha dx1
Issue: Hi I have recently been given this projector and I am unsure wether its damaged or needs a new bulb. ManyThanks
Date: 2020-05-10 21:22:21 +01:00
Location: England
Manufacturer: Sony
Model: VPL-VW100
Issue: PLEASE CAN YOU TAKE MY PROJECTOR THANKS
Date: 2020-05-09 18:07:37 +01:00
Location: England
Manufacturer: Epson
Model: EB-S41
Issue: Hi, projector runs fine for approximately 40 minutes, then intermittently switches itself off for approximately one second and then switches back on, this happens at varying intervals and seems to get worse the longer the projector stays on, obviously this ruins the whole viewing experience, if you could help I’d appreciate it.
Date: 2020-05-09 14:03:31 +01:00
Location: England
Manufacturer: Philips
Model: HDP1590
Issue: Projector is giving error for fan failuer and shutting down within 2-3 min from the start
Date: 2020-05-08 23:04:17 +01:00
Location: England
Manufacturer: Other
Model: Draper 116140 Electric Projector Screen
Issue: Good Morning,
The motor in our Draper 116140 Electric Projector Screen is no longer workings and the screen does not open and close at the push of the button. We are looking at a quote to fix the screen or replace it if it in not fixable.
Best wishes
Katherine Johnston
Date: 2020-05-07 10:28:53 +01:00
Location: England
Manufacturer: Sony
Model: Vpl hs3
Issue: The projector is just a blue screen and coming up out of range
Date: 2020-05-06 15:39:27 +01:00
Location: England
Manufacturer: Optoma
Model: HD
Issue: Our projector has been returned from you after replacement lamp, colour wheel and service at a cost of £250 but still has a washed out picture projected. We have requested a return pick up many times without success. Please would you arrange a return pick up to rectify. Many thanks.
Date: 2020-05-06 12:12:41 +01:00
Location: England
Manufacturer: Philips
Model: PPX4835
Issue: The colour has gone, everything is a shade of orange.
Date: 2020-05-05 22:00:28 +01:00
Location: England
Manufacturer: Epson
Model: EB-X6
Issue: Hi, my Epson projector's temp light flashes red after a few seconds of turning on. Then the projector stops projecting and can only be turned off by unplugging. From online research I think it's a fan or temp sensor issue. Would you be able to give me an estimate cost of repair, please? Many thanks
Date: 2020-05-04 21:33:03 +01:00
Location: England
Manufacturer: Epson
Model: EH-Tw5200
Issue: Auto iris intermittent error
Date: 2020-05-04 15:07:39 +01:00
Location: England
Manufacturer: Acer
Model: p1200
Issue: Pls my projector has white dusts.
Date: 2020-05-04 10:46:09 +01:00
Location: England
Manufacturer: BenQ
Model: MP510
Issue: Hello,

I have a BenQ MP510 in good working condition and with original box available for pick up / recycling.

Please confirm if you would like the machine.

Kind regards,
Justin Fitzpatrick
Date: 2020-05-03 14:04:30 +01:00
Location: England
Manufacturer: NOBO
Model: x22-c
Issue: little black dots on screen when the machine is on
Date: 2020-05-02 22:19:24 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW94200
Issue: 3 blue, thin, vertical lines being projected
Date: 2020-05-02 18:00:02 +01:00
Location: England
Manufacturer: JVC
Model: DLA-X5000BE
Issue: 4 year old machine ceiling mounted, well maintained
New lamp fitted recently and after 5 hours unit stopped with 3 lights flashing on front.
After getting a replacement JVC lamp unit same issue happened.
My JVC dealer reckons Ballast board has gone nb just talked ie no actual inspection
Date: 2020-05-02 16:11:58 +01:00
Location: Wales
Manufacturer: InFocus
Model: In72
Issue: Image is flickering and unit closes down after a few minutes, tried to clean colour wheel,
Date: 2020-04-30 10:53:45 +01:00
Location: England
Manufacturer: Optoma
Model: HD33
Issue: Hello, I have an Optoma HD33 that is displaying a darker image on the left side of the screen. Not always noticeable but easier to notice on darker scenes. It’s completely split down the middle. I wondered if you could email me your thoughts on what this could be and weather it’s worth sending the unit to you. Regards, Josh
Date: 2020-04-28 12:25:59 +01:00
Location: England
Manufacturer: Epson
Model: EB S -41
Issue: Flashing Blue Lamp Icon and no picture
Date: 2020-04-27 22:11:03 +01:00
Location: England
Manufacturer: Epson
Model: EBS-41
Issue: Flashing Blue Lamp Icon and no picture
Date: 2020-04-27 22:09:09 +01:00
Location: England
Manufacturer: JVC
Model: DLA-HD 1
Issue: Looking for quote in first instance if possible. Projector powers up and bulb works, image appears and then after around 2 minutes it cuts off as if an overheating switch has triggered. Before this fault started my daughter left the projector on with cupboard door shut in front so it may have overheated.
Date: 2020-04-26 19:44:24 +01:00
Location: England
Manufacturer: Epson
Model: EH-TW5100
Issue: We have a blue line running vertically across the screen
Date: 2020-04-20 20:02:37 +01:00
Location: England
Manufacturer: Optoma
Model: OPTOMA HD141X 1080P
Issue: Apologies I accidently pressed send before completing the message. Can you look at the machine, the onboard power supply fuse has gone. I also have a new colour wheel should it require changing.

Many thanks
Date: 2020-04-20 09:09:19 +01:00
Location: England
Manufacturer: Optoma
Model: HD141X OPTOMA HD141X 1080P
Issue: Apologies I accidently pressed send before completing the message. Can you look at the machine, the onboard power supply fuse has gone. I also have a new colour wheel should it require changing.

Many thanks
Date: 2020-04-20 09:07:57 +01:00
Location: England
Manufacturer: Vivitek
Model: Qumi
Issue: Hi there - I have a qumi mini projector. There seem to be two things wrong with it:-

1) it’s noisy - the noise goes away if I squeeze it gently just where the air vent is underneath ... but a proper solution would be great!

2) it turns itself off after a few minutes, and the L and R arrow lights on top start blinking alternatively ... not sure what this means?

Would be great it if could be fixed, so please let me know if you think it’s worth a go! Bulb seems fine (for the minutes when it actually works)
Date: 2020-04-18 14:44:02 +01:00
Location: England
Manufacturer: Sony
Model: MP-CL1
Issue: I have a Sony MP-CL1 mini projector that requires repair.

The "Enter" switch has broken and needs to be replaced.

Are you able to service this unit?

Crossing fingers for a YES :) .

Regards

Bart
Date: 2020-04-16 16:48:28 +01:00
Location: England
Manufacturer: BenQ
Model: W1070+
Issue: Projector lamp blow & has been replaced, however the front fan no longer works.
Please could I have a quote for repairing this? Thanks
Date: 2020-04-16 16:09:13 +01:00
Location: England
Manufacturer: BenQ
Model: LW61ST+
Issue: Our projector has started randomly turning off and the power light goes red. We then can't turn it back on unless we leave for a few hours.
Date: 2020-04-15 11:04:13 +01:00
Location: England
Manufacturer: Other
Model: RIF6 cube
Issue: My can you let me know the costs incurred with repairing my projector? I think it may be an issue with the HDMI port, maybe a loose connection.

Date: 2020-04-13 09:37:45 +01:00
Location: England
Manufacturer: Optoma
Model: ML750e
Issue: Fan failure warning when turned on.
Date: 2020-04-09 12:00:14 +01:00
Location: Scotland
Manufacturer: Other
Model: WiMiUs P20
Issue: 2x WiMiUs P20 native 1080p projectors, both with significant marks on the LCD inside, which causes large black spots on the projected image. I have taken one apart, in order to assess the problem but the LCD is beyond repair. The other hasn't been taken apart but has the same problem. Essentially they both need new LCD panels.
Date: 2020-04-07 12:23:35 +01:00
Location: England
Manufacturer: Optoma
Model: Optoma 141 short throw
Issue: Hi
The bulb exploded in the machine, I’ve replaced bulb with an original optoma bulb but it still won’t work , it won’t light up
Date: 2020-04-03 16:11:16 +01:00
Location: England
Manufacturer: InFocus
Model: IN72
Issue: Our projector has a dark shadow area in roughly in the lower middle of the projected image, I replaced the bub, but it has not fixed the problem. Given the present Corona Virus lock down, are you still operational? I tried calling your number and this appears to be a private individuals number
Date: 2020-04-01 10:30:57 +01:00
Location: England
Manufacturer: InFocus
Model: IN72
Issue: In view of Corona Virus , are you still operating?
Date: 2020-04-01 09:34:21 +01:00
Location: England
Manufacturer: BenQ
Model: tbc
Issue: hi,

are you open and trading? I emailed a week or so ago about replacing the chip on my benq projector.

Please contact me if you're able to help.

Thanks

JG
Date: 2020-03-26 10:28:24 +00:00
Location: England
Manufacturer: Optoma
Model: OPTOMA HD141X
Issue: Optoma HD141x projector sound cutting out every so often inc when.running on bilt in sound d and when exported out to a device. Same happens with useing any HDMI input device/source. This is a widly reported fault on Optoma Projectors.
Date: 2020-03-21 11:01:52 +00:00
Location: England
Manufacturer: Other
Model: Laser Beam Pro C200
Issue: The projector is projecting a purple colour dim image.
Date: 2020-03-18 14:13:15 +00:00
Location: England
Manufacturer: Other
Model: Laser Beam Pro C200
Issue: The projector is projecting in small image only in purple colour and dimmed.
Date: 2020-03-18 12:09:36 +00:00
Location: England
Manufacturer: Epson
Model: TW-7400
Issue: Pj has one bad dust spot and several less noticeable others. Could you please give me a quote for the job?
Date: 2020-03-18 10:47:00 +00:00
Location: England
Manufacturer: BenQ
Model: W600
Issue: The projector is showing some white dots, not many, but wondered how much to replace the DLP chip
Date: 2020-03-16 15:33:32 +00:00
Location: England
Manufacturer: Optoma
Model: Daexnzgz
Issue: The projector is not switching on red light comes on and blinks but does not not turn green instead just goes out
Date: 2020-03-14 08:31:00 +00:00
Location: England
Manufacturer: Optoma
Model: OPTOMA GT1080E
Issue: We have a OPTOMA GT1080E which has no video output.

Date: 2020-03-13 10:11:25 +00:00
Location: Ireland Including Northern Ireland
Manufacturer: NEC
Model: M402W
Issue: We need our projector serviced. It seems to be making a rattling/fan noise
Date: 2020-03-12 14:07:23 +00:00
Location: England
Manufacturer: Epson
Model: 3LCD WXGA EB-450Wi
Issue: I hope you can help. Our conference room Epson projector has stopped working. It was flashing 3 red lights. I changed the bulb and it worked for a very short time and then stopped. It will not come on but makes a 'fan' sound and then the 3 red lights start flashing again. We would need someone to remove the projector from the suspension unit, as well as collection please. How much would this cost approximately? I need to know if it is worth repairing, as it is now 9 years old. Are you able to offer this service?
Date: 2020-03-10 17:23:10 +00:00
Location: England
Manufacturer: Sony
Model: Vol-cx5
Issue: Projector no longer turns on.
Date: 2020-03-08 11:20:34 +00:00
Location: Scotland
Manufacturer: Hitachi
Model: ED-A220N
Issue: Requires lenses cleaning and probably re-aligning as colours appear faded and display is not clear. Unsure when the lamp was last replaced or even if it is the correct one.
Date: 2020-03-08 10:54:02 +00:00
Location: England
Manufacturer: NOBO
Model: X16-p
Issue: Can I have an estimate to repair the x16-p DLP projector please. When powered up there is a vertical flashing white line that does fluctuate in colour but is constantly visible when presentations are underway.
Date: 2020-03-07 18:00:05 +00:00
Location: Wales
Manufacturer: Optoma
Model: HD29 darby
Issue: I have sent a previous message but I've not heard from you.

My Optima projector turns on but no image is projected on the screen. I'm interested in an estimate for repair please and would appreciate contact to discuss.
Date: 2020-03-07 07:54:50 +00:00
Location: England
Manufacturer: ViewSonic
Model: Pro7827HD
Issue: The bulb popped! Pretty straight-forward bulb replacement. I've never had it fixed before so I don't know the process behind it all, or how much it would cost. The fan is also a little louder than it used to be but that may just be the dust
Date: 2020-03-05 19:30:05 +00:00
Location: England
Manufacturer: Optoma
Model: OPTOMA GT1080E DLP FULL HD 1080P SHORT THROW
Issue: Projector has no output any ports.
Date: 2020-03-05 14:38:29 +00:00
Location: Wales
Manufacturer: Optoma
Model: Darbee HD29H
Issue: Projector powers up but there is no image
Date: 2020-03-04 20:30:52 +00:00
Location: Scotland
Manufacturer: InFocus
Model: IN83
Issue: Image starts flashing/ corrupted and eventually goes black/blank. Repair estimate appreciated.
Thanks
Date: 2020-03-03 17:29:54 +00:00
Location: England
Manufacturer: Epson
Model: EB-465i
Issue: After a short time of being powered up the projector will shut down and show an overheating error light. The air filters are clear and the internal cooling fans are all spinning freely so we believe the temerature sensing thermistor is defective.

How much would you expect this to cost to be repaired?
Date: 2020-03-03 17:00:42 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW650
Issue: Hi,

I'm looking to get a quote for a projector repair. Issue suggests that its power related as turned off when plugging into mains. Have tried replacing fuse in plug socket but to no avail - projector still does not turn on.
Date: 2020-03-02 12:37:21 +00:00
Location: England
Manufacturer: Philips
Model: PICOPIX PPX3614
Issue: Hi, We have the above projector which we use in the club. I have charged it overnight as we haven't used it since September. It turned on, showed the main page and then the screen went blank and it also will not turn off. I was wondering if this was something you could sort for us? Any honest advice is appreciated.
Thanks, Dan.
Date: 2020-03-01 10:23:56 +00:00
Location: England
Manufacturer: Epson
Model: Epson TW3200 MODELH416B
Issue: Overheats and shutsdown
Date: 2020-02-29 19:35:24 +00:00
Location: England
Manufacturer: Epson
Model: eh-tw9200
Issue: Hi

I've had this projector for a number of years (bought ex-demo from Sevenoaks) - and I've always had a problem with focus/sharpness at the bottom of the image (in particular bottom-left corner). Projector is level - screen is vertical - and I have no keystone adjustment etc. I've fiddled with the panel alignment settings for hours - but with no joy. The best explanation is that there appear to be two slightly misaligned sets of pixels (in all colours). The top of the image is much better (althought not perfect). I wonder whether the projector has been previously dropped - and/or the optics damaged.

I have taken pictures but can't find an E-Mail addresss or a way to include them in this message.

Is this likely to be fixable? Or worth fixing?

Regards,

Mike Bromwich

Date: 2020-02-29 12:44:43 +00:00
Location: England
Manufacturer: Panasonic Home Projector
Model: PT-AT6000E
Issue: Hi, I have noticed some changes to the picture of my Panasonic PT-AT6000E LCD projector recently.

The three main symptoms are:

1. LCD misalignment seems to of increased from original delivery amounts (which was present, but minimal in red only), but is now very noticeable on text, and is making movie viewing a little blurrier. Red, green and blue are all misaligned now.

2. Fan noise also seems to of increased.

3. The lamp dims after 1-2 hours of viewing, which never used to happen.

I've had the projector from new (5-6 years), it's never been knocked, and only moved a couple of times for cabling access. The lamp hours is at 2100, halfway through the quoted lamp life of 4000 hours.

Please could I discuss options with an engineer,

Kind Regards

Richard
Date: 2020-02-24 14:02:21 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW650
Issue: No power to the projector at all - tried remote and physical buttons on projector
Date: 2020-02-24 13:38:22 +00:00
Location: England
Manufacturer: Optoma
Model: H181x
Issue: I filled this form before, and got a response but saw it late and lost the email and never called. I tried to remove the dust from my projector myself, but when putting it back together the focus wheel stopped rotating. I didn't snap anything, and it is a mystery to me. I was wondering if it was a problem you'd encountered before, and perhaps if it has an easy solution.
Date: 2020-02-21 10:06:11 +00:00
Location: England
Manufacturer: BenQ
Model: BenQ W1070+
Issue: Hi,

I believe the bulb has blown on my projector and I am in need of a replacement - There was a pop noise while the projector was on. Now the projector doesn't project and when moved I can hear what sounds like glass pieces moving around inside of the casing.

Thanks
Date: 2020-02-20 11:15:22 +00:00
Location: England
Manufacturer: BenQ
Model: w1070
Issue: At this stage I am just after an approximate idea of cost to assess whether repair is worthwhile - the projector is a BenQ w1070, and given the white spot, I assume the DPL/DPD chip is failing. I will also need a bulb replacement....

...so assuming my diagnosis is correct, can you give me a rough idea, including collection/return to County Durham.

I also note that Gateshead may be an option from your website, if that is the case, I can deliver/collect myself.
Date: 2020-02-20 11:07:33 +00:00
Location: England
Manufacturer: JVC
Model: DLA-X70R
Issue: Projector was working fine the day before. Powered off fine. Went to turn on, lens cover opens, no fan spin up, no light emitting. Green on light displays for around 30 seconds and then:

Standby - Solid red
Lamp - Slow, steady flashing amber
Warning - Solid red

The power switch round the back had flicked off at some point. I ordered and fitted a new lamp but it didn't fix it. The old one was working fine before and had around 400 hours on it.

I suspect the ballast board needs repairing or replacing as that's something that tends to go in this model apparently but I don't have the expertise to attempt the repair.

I can drop it off if that's easier.

Regards,
Date: 2020-02-19 10:53:44 +00:00
Location: England
Manufacturer: Epson
Model: EB-460
Issue: Hello,
Could you please give us a quote to repair this projector before you come?
thank you
Date: 2020-02-19 10:29:07 +00:00
Location: England
Manufacturer: InFocus
Model: IN80EU
Issue: The machine has started to become more noisy when running. After some time, it splits the screen whereby the right hand half projects blurred columns down the screen.
Can you please send me approximate costs of a service to the machine, and also the cost of return to the point of collection (as you quote free collection, but no indication of getting it back).
I look forward to hearing from you soon.
Date: 2020-02-17 09:43:49 +00:00
Location: England
Manufacturer: Optoma
Model: HD72i
Issue: Ive just bought a second hand projector, fitted a new bulb and as I turned it on there was a sound of breaking (glass?). The projector does give out an image, but appears black and white. there is also a sound of glass inside the machine and one shard has now fallen out. I would appreciate an indication of prices before committing to works?
Date: 2020-02-14 16:23:26 +00:00
Location: England
Manufacturer: BenQ
Model: benq w1200
Issue: Please can I have an free repair estimate
The lamp went in the projector we replaced it the projector started to work again perfectly but about 20 minutes later the projector image became distorted with loads of colors lines we tried again and the same thing keeps happening 15-20 minutes in to using it
Date: 2020-02-14 13:31:55 +00:00
Location: Scotland
Manufacturer: Panasonic
Model: EZ580
Issue: Please proceed with collect and repair of Panasonic EZ580
Date: 2020-02-13 10:44:40 +00:00
Location: England
Manufacturer: BenQ
Model: w2000
Issue: Hi,
I have a BenqW2000, 2 years old, with an extended warranty.
It doesn't have any problem, just I'd like to be cleaned and serviced properly on the inside.
I was wondering how much would it cost.
Many thanks
Date: 2020-02-12 16:19:07 +00:00
Location: Scotland
Manufacturer: Panasonic
Model: EZ580
Issue: we have 2 projectors
The picture looks quite yellow when it should be a white image.
I believe this is usually due to the blue polariser being burnt out.
Can you please advise on approx repair costs for this
Date: 2020-02-12 14:48:48 +00:00
Location: England
Manufacturer: Optoma
Model: EH503
Issue: Hi, have 3 projectors that we would like to recycle together with the lamps. Could you please let me know if would it be possible to arrange this with you, and if so, when?
Date: 2020-02-11 15:10:24 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW6000W
Issue: The projector projects 2 blue/green vertical lines & 7 yellow vertical lines. Epson told me that this means it needs a service. They costed it; I accepted the estimate & then they told me they didn’t service that model any more & that I had to find someone else. So I found you. Are you able to help me?
Date: 2020-02-10 18:09:34 +00:00
Location: Scotland
Manufacturer: Acer
Model: H7550BD
Issue: Fan Fail
Date: 2020-02-08 04:13:47 +00:00
Location: England
Manufacturer: Promethean
Model: EST-P1
Issue: Hi please can you send me a quotation for a colour wheel repair.
Date: 2020-02-06 16:39:23 +00:00
Location: England
Manufacturer: ViewSonic
Model: PJD7820HD
Issue: Hi there

The projector is working well but is showing white dots on the projected image. Can you rectify this? This projector is used as a back up to my main projector. I am exhibiting a video artwork for the National Trust at the end of March and will need this projector as a 'back up' around then. I could arrange delivery to your premises in Covent Garden myself as my husband works near you.

I look forward to hearing from you.

Sue Mann
Date: 2020-02-04 09:25:52 +00:00
Location: England
Manufacturer: Epson
Model: Epson EB-S41 SVGA
Issue: HDMI port on projector damaged and needs replacing.

How much will it cost? Thanks
Date: 2020-02-03 20:26:34 +00:00
Location: England
Manufacturer: Epson
Model: Epson EB-S41 SVGA
Issue: HDMI port damaged and need replacing.

How much will it cost? Thanks
Date: 2020-02-03 20:22:20 +00:00
Location: England
Manufacturer: Optoma
Model: HD20
Issue: Message for Holly,
I had booked my projector in for pick up from my office on Friday 31 Jan, but no pick up arrived?
The projector is at the address given (Holden House).
If easier I can drop this into Covent Garden this morning. Please confirm.
Date: 2020-02-03 08:13:10 +00:00
Location: England
Manufacturer: Vivitek
Model: QUMI Q5
Issue: Ive got a Qumi Q5 projector, it turns on, I can access the menu, but after about a minute it turns off, the led flashes on top of the device and the troubleshooting guide tells me I've got a fan error. How do you charge?
Date: 2020-02-01 11:31:52 +00:00
Location: England
Manufacturer: Sony
Model: VPL-EX5
Issue: and there seems to be a problem with the bulb. The little light on the top that says something about the bulb flashes and it will not fire up - can you give me a estimate as to how much it would cost to repair,
Date: 2020-01-31 14:04:01 +00:00
Location: England
Manufacturer: Epson
Model: Eb-S02H
Issue: hi,

my projector will not power on, have tried changing lamp with recomended replacement part and have checked to see if fuse is faulty but to no avail, please let me know if you can help to repair,

thanks,
Date: 2020-01-31 10:18:26 +00:00
Location: England
Manufacturer: Epson
Model: TBC
Issue: Hi Holly, please call me back regarding my projector.
Date: 2020-01-30 12:01:36 +00:00
Location: England
Manufacturer: Mitsubishi
Model: WD380U EST
Issue: Hello,
I spoke to holly yesterday I would like a quote for a replacement DMD Chip. Look forward to hearing from you,
Thanks

Date: 2020-01-30 11:14:10 +00:00
Location: England
Manufacturer: Optoma
Model: Hd28dse
Issue: I recently changed the bulb so it's not the bulb, I believe it is a fan issue as the error code from the LEDs show that. However I am not sure. This projector has 2 Fans, would you be able to give me a quote for the replacement of both fans? (I just want to get an idea on how much its going to cost to see if its better to repair or buy new projector. Please contact me via email.
Date: 2020-01-30 01:22:06 +00:00
Location: England
Manufacturer: Smartboard
Model: UF65
Issue: Hi there,

I have a UF65 Smart Projector that is having a flickering issue.

After warming up it starts to flicker different colours and looks like a disco!

Date: 2020-01-29 13:02:15 +00:00
Location: England
Manufacturer: Mitsubishi
Model: XD560LP
Issue: Hello, Please can you kindly provide a quote to supply and fit a replacement DMD Chip?
Thank you
Date: 2020-01-28 11:20:30 +00:00
Location: England
Manufacturer: Optoma
Model: HD20
Issue: My Optoma HD20 requires a service and possible colourwheel or lamp replacement as the picture has deteriorated over time.
I would appreciate an estimate, and appreciate you may find repairs required as you progress. I am happy to drop projector into you at Shelton St if that helps.
Date: 2020-01-28 08:35:21 +00:00
Location: England
Manufacturer: Epson
Model: Eb-S02H
Issue: it's an Epson EB-S02H, (bought off ebay second hand so not sure on what's happened), doesn't seem to power on. Have checked fuse and that doesn't seem to be the problem
Date: 2020-01-27 16:46:29 +00:00
Location: England
Manufacturer: Optoma
Model: Hd141x
Issue: I will love you if you guys can fix these for a good price!
There is a brand new bulb with it as well if it helps??
Date: 2020-01-25 20:43:52 +00:00
Location: Scotland
Manufacturer: BenQ
Model: TH681+
Issue: Hi ooking for some help or whether you could repair if i need to send it. When i power up my BENQ TH681+ the power led goes green, the fans power up etc but then the lamp led goes solid red.

Looking at the manual (page 52) it says this means CW start fail
https://benqesupport.blob.core.windows.net/esupport/Projector/UserManual/Projector_um_User%20Manual_20140808_084800TH681_TH681+_EN.pdf
I opened up the projector and powered it up with the lamp out and the color wheel clearly visivle. When i turn it on the color wheel does spin but stops after about 2 seconds. I tried plugging in the lamp and it did exactly the same thing.
The wheel seems free when trying to move the inside ring with a cotton bud. No dust or anything inside the projector that i can see
Currently have the projector in bits
Date: 2020-01-25 18:53:42 +00:00
Location: England
Manufacturer: ViewSonic
Model: PJD7820HD
Issue: The projector seems to be fine but has accumulated a lot of dust in the optical path. I'd be grateful if you could email me an estimate.
Date: 2020-01-24 15:08:53 +00:00
Location: England
Manufacturer: ViewSonic
Model: PJD7820HD
Issue: The projector seems to be in good nick but dust has accumulated in the optical path. Would you be able to email me an estimate?
Date: 2020-01-24 15:04:26 +00:00
Location: England
Manufacturer: Optoma
Model: HD141X
Issue: Hi,

do you supply parts only?

I am looking for a colour wheel for an Optoma HS141X (can collect)

Thanks

JD
Date: 2020-01-23 16:06:30 +00:00
Location: England
Manufacturer: Panasonic
Model: Polaroid LCD projector 215
Issue: I have a very old Polaroid projector....I think it is Panasonic as the case it came with is Panasonic. The projector does not focus well and is a little dark and slight tinge of blue/ pink, so I guess may be the lens. Not sure if it is worth repairing and you appear to be one of the few places that could possibly repair it. I am coming to London this weekend so had wondered about dropping it off with you. Can you advise please?
Many thanks.
Date: 2020-01-21 10:50:06 +00:00
Location: England
Manufacturer: Optoma
Model: HD26 DLP Projector
Issue: Good evening,

We have an Optoma HD26 projector that was turned on the other day
Date: 2020-01-20 21:04:58 +00:00
Location: England
Manufacturer: Optoma
Model: HD26 DLP Projector
Issue: Good evening,

We have an Optoma HD26 projector that we use onboard a ship in the saloon. It was turned on when the temp was about 2 degrees. When we turned the projector on, it sparked and smoke come out of the side of the projector. We switched it off straight away and opened it up. The lamp looks fine but it looks like it needs a new powerboard. Could this be done and how much would it cost?

Many thanks
Date: 2020-01-20 21:03:35 +00:00
Location: England
Manufacturer: Optoma
Model: Hd141X
Issue: Projector struggles to start up - see a couple of colours then it either makes a screeching/ beeping noise and shuts down (bulb light comes on solid) or it starts up and makes a horrible whirring noise and the picture is pretty terrible - pixelated and blocky and rainbow banding. Have images and video footage if required?

Just put a new bulb in, suspect it's the colour wheel?

Happy to drop off/ collect in London?
Date: 2020-01-20 21:01:57 +00:00
Location: England
Manufacturer: Acer
Model: S1283e
Issue: 3-yr old projector that has stopped working. Thought it was the bulb so this has been replaced but without success.
School open 8am to 6pm Mon-Fri
Date: 2020-01-20 13:37:52 +00:00
Location: England
Manufacturer: ViewSonic
Model: PJD7720HD
Issue: Hello, I need a projector repaired and I am wondering what the price might be.
The projector is a: ViewSonic Lightstream PDJ5153 SVGA 3D Projector 800x600, 3000 Lumens

Due to the projector being neglected by someone borrowing it, it seems to have become very dusty, however the main problem is that there is a piece missing. The front lens bit of the projector seems to be missing, as you’ll see in the photos. This doesn’t seem to stop the image coming through, but for some reason there is extra light around it and the edges are not defined and the whole thing is a bit blurry and weird. Dust and particles seem to be inside the lens because the video is dirty no matter how much I wipe the outer lens.

Any help would be muc
Date: 2020-01-19 19:35:46 +00:00
Location: England
Manufacturer: Sony
Model: HW40ES
Issue: Hi,

The lamp in my projector exploded. The projector needs a good clean and a new lamp installed.
Ta
Date: 2020-01-19 15:34:39 +00:00
Location: England
Manufacturer: Optoma
Model: HDMI-HD600X DLP Projection Display
Issue: White dots on projector screen repair
Date: 2020-01-17 21:46:54 +00:00
Location: England
Manufacturer: InFocus
Model: IN124STa
Issue: I have two InFocus IN124STa projectors that need repair. One would need a new HDMI input as this has failed and cannot get signal but all other input work fine, this one would need quoting before going ahead as it belongs to a volunteer group. The other one cannot hold a stable image and produces a blurry/fuzzy edge to the image. This one will need servicing, diagnosing, and repairing. Is this something that you can help with?
Thanks,
AJ
Date: 2020-01-17 07:56:26 +00:00
Location: England
Manufacturer: Sony
Model: VPL-GH10
Issue: Hello,
I have 3 Sony projectors VPL-GH10 where I need to replace the optical block P/N:PS418699.19.5.842.
Is it possible to receive a quotation about?
Thanks in advance
Date: 2020-01-16 15:59:33 +00:00
Location: England
Manufacturer: Mitsubishi
Model: XD250U
Issue: Hello,

We have white dots in the right hand corner of the screen when we turn the projector on. We will require the projector back before 9th February. Thank You
Date: 2020-01-16 15:35:28 +00:00
Location: England
Manufacturer: Sony
Model: HW 45es
Issue: The lens adjust knob didn’t work( not the zoom/focus knob)
Date: 2020-01-16 15:30:34 +00:00
Location: England
Manufacturer: Sony
Model: HW-45es
Issue: The lens adjustment knob didn’t work( not the zoom in/focus knob)
Date: 2020-01-16 15:28:32 +00:00
Location: England
Manufacturer: Other
Model: Basstop (portable)
Issue: Hello, I believe the inner lens of my projector needs to be cleaned as there are some small black dots on the display. Also, there is a region on the projection that has an orange tint/hue, I'm not sure what the cause of this is but would also like to have that fixed. What will be the cost of repair, if possible?
Date: 2020-01-15 13:35:39 +00:00
Location: England
Manufacturer: BenQ
Model: BenQ MP771
Issue: Good morning,

Our main hall projector is suffering from:

a) loud buzzing/vibrating noise when in operation
b) blurred image (likely caused by the vibration)
c) poor light output

We have a public event on Jan 21st (open to parents).

Would it be possible to arrange a free(?) collection and evaluation?

The replacement projector would need to handle a 2.3m throw to a dropdown projection screen 3.5m wide x 2.6m tall. The projector is on a fixed ceiling mount (cannot be moved). The lens is aligned more or less with the top of the screen.

Thank you.
Date: 2020-01-15 09:58:46 +00:00
Location: Wales
Manufacturer: BenQ
Model: MP525 ST digital projector
Issue: White dots on screen.
Date: 2020-01-14 08:35:59 +00:00
Location: England
Manufacturer: Epson
Model: EH-TW7400
Issue: Hi, my Epson EH-TW7400 projector has stopped working. Starting up it shows both status and power light flashing. The user manual says that is an "internal error." Can you repair this make and fault? And how much would it cost? Thanks in advance.
Date: 2020-01-14 00:17:28 +00:00
Location: England
Manufacturer: Other
Model: Wimius P18
Issue: Hello I just bought a projector from Facebook marketplace that they claimed to be perfect and I have come home and it has a huge yellow splodge on the screen. Not ideal! I’d love a quote for repair! Thanks, Annie
Date: 2020-01-13 21:42:22 +00:00
Location: England
Manufacturer: Epson
Model: ELPLP 88 / E BX 27
Issue: Projector bulb for large screen tv needs replacing as old one no longer working.
Date: 2020-01-13 13:13:03 +00:00
Location: England
Manufacturer: Other
Model: Sanyo
Issue: Could someone please contact me on 01379671552 many thanks. Lee
Date: 2020-01-13 09:37:07 +00:00
Location: England
Manufacturer: Optoma
Model: Optoma
Issue: The boiler is in need of maintenance and suspect faulty DMD chip because of white spots on the screen. I need the projector repaired ASAP because it is used for a church.
Date: 2020-01-12 18:25:27 +00:00
Location: England
Manufacturer: Other
Model: Laser beam pro c200
Issue: The laser projector projecting only a red to pink colour.
Date: 2020-01-11 23:13:50 +00:00
Location: England
Manufacturer: HP
Model: MP3322
Issue: Unreliable/nil data transfer from computer to projector. Suspect faulty VGA port.
Date: 2020-01-11 14:21:56 +00:00
Location: England
Manufacturer: BenQ
Model: MX850UST
Issue: White dots appearing, suspected DMD issue
Date: 2020-01-06 14:12:20 +00:00
Location: England
Manufacturer: Other
Model: Nebula primo model D2210
Issue: Dean chamberlain 07505497922
Date: 2020-01-06 13:17:23 +00:00
Location: England
Manufacturer: Mitsubishi
Model: WD7 20U (DLP)
Issue: Hi

I believe the DMD chip has just started to fail on our projector as we have a single cluster of pixels that are forming a white dot when projecting.

The projector is otherwise working as expected.
Could you please give me an idea of how much it would cost to repair this?

Many thanks
Matt

Date: 2020-01-04 19:50:25 +00:00
Location: England
Manufacturer: Optoma
Model: H181x
Issue: I opened my optoma h181x to clean the dust, but now the focus no longer rotates. It is driving me to distraction. I could drop it off in Covent Garden.

Thank you,
Hannah
Date: 2020-01-04 18:07:32 +00:00
Location: England
Manufacturer: Optoma
Model: Optoma H181x projector
Issue: I have Optoma H181x projector. Its been 3 years now. Projector was working fine for 1 hours and gets shut down after that but now its not even starting now.

Kindly please provide the quote and guide the repair process.
Date: 2020-01-03 22:11:42 +00:00
Location: England
Manufacturer: Other
Model: Elite
Issue: Hello

We've got an old OHP - would you be able to use/reuse any parts and be interested to take it?
Date: 2020-01-03 17:04:24 +00:00
Location: England
Manufacturer: Sanyo
Model: WUXGA
Issue: The above project requires a clean and a service. Also the HDMI port has become loose and requires fixing.
Date: 2020-01-03 08:48:04 +00:00
Location: England
Manufacturer: Optoma
Model: optoma hd142x
Issue: Device has lines during films and browsing, I believe something may have been knocked and come out of place
Date: 2020-01-02 20:33:08 +00:00
Location: England
Manufacturer: Philips
Model: Screeneo hdp1690
Issue: Multiple black dots, new dpd required?
Date: 2019-12-27 22:40:54 +00:00
Location: England
Manufacturer: Philips
Model: Screened HDP 1690
Issue: We have black spots on the top and bottom of the projected image
Date: 2019-12-25 21:25:59 +00:00
Location: England
Manufacturer: Other
Model: Z4X
Issue: My z4x just lost brightness of the pictures and it's pictures are faint can't see anything. Unless you place it very close to the wall to display a small picture. LCD problem.
Date: 2019-12-24 20:52:37 +00:00
Location: England
Manufacturer: Other
Model: Xgimi z4x
Issue: My z4x just lost brightness and contrast to the pictures. It's soo faint you can't see the pictures.
I have used it just a couple of times as it for traveling purpose.
Date: 2019-12-24 20:40:25 +00:00
Location: England
Manufacturer: Other
Model: Xgimi z4x
Issue: My z4x just lost brightness l have just used it a few times only for traveling purpose.
It comes on with some software message and the pictures are too faint.
Date: 2019-12-24 20:35:03 +00:00
Location: England
Manufacturer: Other
Model: Iochow
Issue: Need projector to be repaired as suddenly it has stopped working.
Date: 2019-12-24 17:00:34 +00:00
Location: England
Manufacturer: BenQ
Model: w1070+
Issue: Hello , I am experiencing the same problem that I was having a few months ago . The lamp warning light is on despite replacing the lamp. i have tried several lamps. not sure what to do. The projector is still under warranty from the last repair. please advise
Date: 2019-12-24 15:52:14 +00:00
Location: England
Manufacturer: Epson
Model: EB-U04
Issue: Good morning,
after noticing that the fans where kicking on more often than normal, i have recently disassembled my lcd projector to perform cleaning and maintenance. After putting it back together, as soon as i plug in the power cord the breaker trips. I would really appreciate some assistance from your side. i will also be able to bring the projector to your address myself.
Thanks for your attention.
Best regards

Date: 2019-12-22 11:32:49 +00:00
Location: Scotland
Manufacturer: Sanyo
Model: PLC-WXU300
Issue: This projector hasn't worked in some time and looking for recycling options
Date: 2019-12-20 14:36:02 +00:00
Location: England
Manufacturer: BenQ
Model: W1060
Issue: Won’t turn on keeps restarting
Date: 2019-12-19 19:34:28 +00:00
Location: England
Manufacturer: BenQ
Model: W1070
Issue: Won’t turn on keeps restarting
Date: 2019-12-17 19:52:48 +00:00
Location: England
Manufacturer: Acer
Model: H7550BD
Issue: The projector fans appear to have failed. They don’t spin and so it quickly fails.
I can drop the projector to you any morning at 9am as Holborn is not far from me

Date: 2019-12-15 20:57:20 +00:00
Location: England
Manufacturer: Acer
Model: P1165(C0E)
Issue: Hi, you arranged collection of projector yesterday. Couldn't wait in all day due to prior appointment. Courier came after I left at 3.30pm. Please rearrange collection for Mon am as I have to be out from 2.30pm. Sorry for the inconvenience.
Date: 2019-12-14 07:32:47 +00:00
Location: England
Manufacturer: Acer
Model: P1165(C0E)
Issue: My projector has become a little noisy and hot but the main problem is the colours are diffuse and some of the greens are not showing properly. I think it may be a colour wheel issue.
Date: 2019-12-11 13:46:06 +00:00
Location: England
Manufacturer: Epson
Model: EB-435W
Issue: The projector is showing a red light and is overheating. I have cleaned the filter, yet the problem still exists.
Date: 2019-12-11 11:07:46 +00:00
Location: Wales
Manufacturer: Epson
Model: EB-460i
Issue: The above projector has three red lights on it. Checked manual and says to contact repair center.
What are your initial costs for repairs
Date: 2019-12-11 08:14:22 +00:00
Location: England
Manufacturer: Optoma
Model: ew766
Issue: Projector does not boot.
Bought this projector in October on Ebay @ 80GBP. Worked fine for a month and then suddenly one day stopped booting. Power switch light blinks blue on switching the projector on. Fan starts but bulb does not light up. Lamp hours around 300. Physically lamp looks normal. I wish to know what would be the expected cost of repair?
Date: 2019-12-08 11:06:24 +00:00
Location: England
Manufacturer: ViewSonic
Model: PJL 7201
Issue: We have a Viewsonic PJL 7201 projector (model VS12199) which has served us well for about 10 years (used about 20 times per annum).

It recently shut down due to overheating (not use in a confined space, filters clean) and as the bulb was the original and we had a spare we replaced that. On the next use (all day meeting) it worked fine.

On the next use within a few minutes of switching it on the overheating message came up again and it shut down.

The fan is working and sounds the same.

Do you think this might be repairable?

Date: 2019-12-06 16:18:15 +00:00
Location: Ireland Including Northern Ireland
Manufacturer: Optoma
Model: OPTOMA HD141X
Issue: Projector has stopped working altogether. Blue light comes on but fans and picture do not. Remote will not turn it on either.
Date: 2019-12-04 04:23:06 +00:00
Location: England
Manufacturer: Epson
Model: H453B
Issue: Projector appears to have a faulty heat sensor. TEMP light comes on after the initial startup. Projector has new bulb replaced after fault initially developed.

Quotation for repair required before proceeding please.
Date: 2019-12-03 09:50:42 +00:00
Location: England
Manufacturer: Vivitek
Model: Qumi Q2-W
Issue: Good afternoon. The mini-hdmi port in the projector seems to be broken - I have tried 2 different cables and no image is projected (it was working couple of days ago). It's an old projector, so I was wondering if you could let me know how much it would be to repair/replace the mini-hdmi port.

Kind regards
Carlos
Date: 2019-12-02 15:30:51 +00:00
Location: England
Manufacturer: LG Electronics
Model: PW1500G
Issue: Image suddenly has a pink hue.

This is a projector for domestic use. I live in central London and can drop off projector if easier.
Date: 2019-11-30 11:18:30 +00:00
Location: England
Manufacturer: BenQ
Model: W1070
Issue: Hi, my projector is working well but has become noisy over time, sounds much like a bad fan I had replaced on a computer once, I have read though this may be the colour wheel?
Also when adjusting the zoom I can see dust particles so assume it needs a good clean.
I understand it is difficult to quote when you haven't even seen the projector yet but is it possible you could give me a price on cleaning and possible colour wheel or fan replacement so I have an idea of what to expect?
Many thanks
Paul
Date: 2019-11-30 01:23:48 +00:00
Location: England
Manufacturer: BenQ
Model: BenQ W1070
Issue: Hello,
Happy with Saturday collection if possible!
The projector is overheating and stopping on it's own.
I already change the bulb and one of the fans with same overheating effect.
Please give a new life o my projector!
Thank you!
Date: 2019-11-29 10:34:23 +00:00
Location: England
Manufacturer: InFocus
Model: 1503
Issue: Hello
I am sorry to say that I am very disappointed with the service you a intending to offer.
I have repeatedly had to chase the progress of my repair and have waited for call back over and over again. I was told that I should receive a quote by email but this has not happened. I am still waiting for this.
I have been told two different prices by phone, and at present I have no idea what is happening with my projector as again I was told I would be called back but again this has not happened.
Unfortunately this is not good enough and I am considering that due to the loss in faith in your process that this may represent the quality of the repair.
If i do not hear back from you in the next day I will be asking for the return of my projector without the repair.

Date: 2019-11-26 09:17:43 +00:00
Location: England
Manufacturer: Optoma
Model: Wish to Collect
Issue: You have my projector ready for return. I have requested collection - I can either personally collect or send an insured courier. I understand that you do not accommodate collections. Please confirm your position as I would like to arrange for collection today from your offices.
Regards,
Justine
Date: 2019-11-25 12:23:35 +00:00
Location: England
Manufacturer: LG Electronics
Model: LG PW150G
Issue: projector image suddenly turned pink
Date: 2019-11-24 10:20:58 +00:00
Location: England
Manufacturer: Barco
Model: Optix R9023449
Issue: I am looking for a Low Frequency Maintenance on a Barco Optix projector with 8000 hours on it.

Serial Number: 2018310080
Date: 2019-11-21 10:00:01 +00:00
Location: England
Manufacturer: Optoma
Model: Gt1080
Issue: Its got a dull picture and some discoloration. How much roughly do you charge?
Date: 2019-11-19 09:21:00 +00:00
Location: England
Manufacturer: Optoma
Model: Optoma
Issue: Dropped the projector and now I've got the led light on on the dashboard. Doesn't turn on because of that
Date: 2019-11-17 14:26:47 +00:00
Location: England
Manufacturer: Acer
Model: h7550bd
Issue: I replaced the bulb when it broke but the fan will no longer come on
Date: 2019-11-15 11:52:22 +00:00
Location: Scotland
Manufacturer: Dell
Model: Dell 4610X Wireless Plus
Issue: Projector will not power up/blows plug fuse.

No preferred collection date.

Estimate & Terms required.
Date: 2019-11-13 11:18:05 +00:00
Location: England
Manufacturer: Optoma
Model: dlp
Issue: serial number;
q736450aaaaac0363
Date: 2019-11-12 17:13:40 +00:00
Location: England
Manufacturer: Other
Model: Pico genie pico projector p55 input 5v =2A
Issue: Pico charging socket has fallen through needs either re attaching or replacing.

Fyi phone number on page has too many numbers and was not recognised by phone.
Date: 2019-11-12 09:11:44 +00:00
Location: England
Manufacturer: LG Electronics
Model: Ph450Ug
Issue: hi, I have a LG PH450u projector. I've noticed I cannot get a rectangular shape 16:9 picture. the top line is not straight. can you repair this and how much would it cost? thanks
Date: 2019-11-09 20:33:18 +00:00
Location: England
Manufacturer: Optoma
Model: EH300
Issue: Projector not illuminating.
Power comes on, fan spins but no light on lamp. Then unit restarts itself. Restarts a few times then has solid red light on lamp and flashing red light on power.
I have tried 2 new lamps and still same issue.
Was working perfectly until a week ago.
Date: 2019-11-08 23:19:20 +00:00
Location: England
Manufacturer: BenQ
Model: BENQ W7500
Issue: I have BENQ W7500 power not come I need to repair
Date: 2019-11-08 22:28:42 +00:00
Location: England
Manufacturer: BenQ
Model: W1070
Issue: Replaced the bulb and after about 3 hours running time I lost signal. I have tried all the ports with no signal , however the menu comes up on the screen
Date: 2019-11-06 23:02:36 +00:00
Location: England
Manufacturer: JVC
Model: JVC DLA-HD100
Issue: LAMP GOES OUT AFTER ABOUT 10 MINUTES.
ORANGE LIGHT BLINKS.
PLEASE PROVIDE A QUOTE OR INDICATION OF COST
Date: 2019-11-06 21:03:00 +00:00
Location: England
Manufacturer: Sanyo
Model: PLC-XU41
Issue: Working projector - image fuzzy, + spare bulb, brand new
Date: 2019-11-04 16:21:55 +00:00
Location: England
Manufacturer: Sony
Model: Sony VPL-VW365ES
Issue: One of the HDMI sockets (the higher thoughput HDCP 2.2 one) has been damaged from an HDMI cable that was plugged in being janked and snapping the inner connector
Date: 2019-11-04 10:25:24 +00:00
Location: England
Manufacturer: Panasonic
Model: PT-LB75NTEA
Issue: THE PROJECTOR NEED REPAIR, BECAUSE IT IS NOT COMING ON AFTER FALLING ON THE SIDE.
Date: 2019-11-04 08:21:08 +00:00
Location: England
Manufacturer: ViewSonic
Model: M1+
Issue: Hi,

I have a portable projector which was fall from 2 meters high and now the fan started making more noise and there is no voice. However the image is fine.

I would like to know what is the process. Can I bring it to you to check the extend of the problem and let me know an estimated cost?

Regards.
Date: 2019-11-03 21:08:04 +00:00
Location: England
Manufacturer: Optoma
Model: Not known
Issue: I would like a free evaluation please as I do not know how much this will cost
Date: 2019-11-03 14:04:00 +00:00
Location: England
Manufacturer: ViewSonic
Model: PLED-W500
Issue: Broken lamp
Date: 2019-11-03 13:31:56 +00:00
Location: England
Manufacturer: Optoma
Model: Pro200X
Issue: The bulb seems to be ok, but I have lots of white dots all over the image, more dense towards one corner.
Date: 2019-11-02 21:05:18 +00:00
Location: England
Manufacturer: Optoma
Model: Pro200X
Issue: The bulb seems to be ok, but I have lots of small white dots all over the image, more dense towards one corner.
Date: 2019-11-02 21:02:44 +00:00
Location: England
Manufacturer: BenQ
Model: 515st
Issue: Projector shows temp and lamp on red
Date: 2019-11-01 14:40:52 +00:00
Location: England
Manufacturer: Epson
Model: EB-X27
Issue: Hi,
The projector seems to have a loose connection in the HDMI slot. It will only work if the cable is held in place.
I can drop off at your premises if that assists.
Also what would the estimated cost of repair be?
Many thanks.
Date: 2019-10-31 14:47:15 +00:00
Location: Ireland Including Northern Ireland
Manufacturer: Other
Model: 3m SCP 725 x 2 and 3mSCP716 x 1
Issue: 3m SCP 725 x 2 and 3mSCP716 x 1

3 Projectors for repair, details as follows:
Projector from May -
Model: 3M SCP725
Serial number: C2D17812439
Problem - starry - DLP chip gone

Room 21 -
Model: 3M SCP725
Serial number: C1H36810629
Problem: Buzzing loudly and getting worse

Room 12 -
Model: 3M SCP716
Serial number: C0K47813130
Problem: starry - DLP chip gone

If you could please let me know details of closest drop off and pick up point that would be great thanks. Can drop off today if suits
Date: 2019-10-31 09:20:40 +00:00
Location: England
Manufacturer: BenQ
Model: W1070+
Issue: Bulb broke, put new bulb in now over heating.
Date: 2019-10-30 13:50:44 +00:00
Location: England
Manufacturer: BenQ
Model: W6500
Issue: Hi there, my projector is working fine but it makes an obtrusive metallic noise, I think when the colour wheel moves, which is off-putting during movies. What would the approximate cost be to have a look at it for me please?

Best regards, Mark
Date: 2019-10-30 12:14:36 +00:00
Location: England
Manufacturer: Acer
Model: I dont know
Issue: I just want to know if you accept drop offs/walk-ins as I want to bring my projector into your Covent Garden location. I would like to know ASAP this morning if possible. I tried calling your number but it only directed me to this form.
Date: 2019-10-29 08:59:06 +00:00
Location: England
Manufacturer: BenQ
Model: 1080ST
Issue: projector won't switch on
Date: 2019-10-26 12:43:11 +01:00
Location: England
Manufacturer: BenQ
Model: 1080ST
Issue: projector won't switch on
Date: 2019-10-26 12:40:10 +01:00
Location: England
Manufacturer: Epson
Model: Ehtw6100
Issue: Hi
My projector is mailing a random beeping. I don’t know it’s it’s a problem. But it’s a annoying. I also feel it’s not performing as well at it should.
Date: 2019-10-26 10:07:25 +01:00
Location: England
Manufacturer: InFocus
Model: 3118HD
Issue: I have replaced the lamp already on this projector, thinking that was the problem, but it is still broken. There must be something else that's causing it to not work.
Date: 2019-10-23 21:36:04 +01:00
Location: England
Manufacturer: Philips
Model: PPX2330/ EU
Issue: The DMD CHIP FAILURE.Coursing spotting right across screen till it covers it entirely. Also the scratches on on the arrow on top of projector, right arrow dose not work properly, Needs sorting if you can please. Thank you.
Date: 2019-10-23 12:37:13 +01:00
Location: England
Manufacturer: Philips
Model: ppx2330/eu
Issue: The DMD CHIP FAILURE.Coursing spotting right across screen till it covers it entirely. Also the scratches on on the arrow on top of projector, arrogoing right dose not work properly. Needs sorting Please> Thank you.
Date: 2019-10-22 23:27:44 +01:00
Location: England
Manufacturer: Philips
Model: ppx2330/eu
Issue: I have lead to believe that the DMD Chip Failure. also the scratched arrow on the top of projector has failed direction on screen needs fixing please.
Date: 2019-10-22 23:09:29 +01:00
Location: England
Manufacturer: InFocus
Model: in1503
Issue: Hello
I am wondering when my projector will be ready as It has been a couple of weeks now.
Many thanks
Karl
Date: 2019-10-22 16:07:44 +01:00

Shop - VC-202-2000-001 Spontania User Training

VC-202-2000-001 Spontania User Training

Description

Additional information

Related products

VC-202-2000-001 Spontania User Training | | VC-202-2000-001